Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Équipement d'écoulement et de confinement laminaires
Z Banque propre à flux laminar horizontal
A rear-filtered workstation that sweeps clean air horizontally across non-hazardous products toward the open front without a top filter section over the work.
- Full-Height Rear Filter
- Forward Horizontal Airflow
- Open Front Access
- Low Overhead Profile
Introduction de produit
A full-height rear filter forms the working back wall of this clean bench. Filtered air travels in a horizontal path across the stainless worktop and leaves through the open front, giving small parts and low-profile assemblies a direct first-air path. The open ceiling improves access to microscopes and fixtures, while the deeper cabinet body houses the rear fan and plenum. Because airflow moves toward the operator, the bench is reserved for non-hazardous work where product cleanliness is the objective.
Key Features
An open upper work zone accommodates tall optical stands and assembly fixtures.
A rigid rear plenum keeps the filter face evenly supplied across its height.
Rounded worktop edges reduce turbulence at the front discharge boundary.
Front-access controls and a visible pressure indicator simplify daily checks.
Préoccupations du client produit
Horizontal flow is effective only when equipment placement preserves the direct air path from the rear filter to the open front.
Large objects block clean air to items positioned in front of them.The deep worktop allows fixtures to be arranged in a single layer close to the rear filter.
A top-mounted filter interferes with tall optical equipment.The rear fan-filter arrangement leaves the upper work zone unobstructed.
Sharp front edges disturb the outgoing air sheet.A radiused stainless worktop lip supports a smoother discharge path.
Hazardous samples could be directed toward the user.Clear use labeling restricts the bench to non-hazardous product-protection tasks.
Les applications typiques
Electronics assemblyOptical alignmentNon-hazardous sample preparationParticle-sensitive component packaging
Paramètres techniques
Typical configurable construction ranges for a horizontal laminar flow clean bench are listed below.
| Matériaux de base | SUS304 worktop with a powder-coated steel rear plenum and mineral-wool acoustic infill |
|---|---|
| Panneau épaisseur | 30-50 mm rear and side plenum sections |
| Largeur effective | 900 - 1800 mm Largeur de travail claire |
| Longueur maximale | Up to 1200 mm overall cabinet depth |
| Acier face épaisseur | 0.9-1.2 mm powder-coated steel; 1.0-1.5 mm SUS304 worktop |
| Densité Core | 80-120 kg/m³ acoustic mineral-wool infill |
| Conductivité thermique | 0,035 - 0,045 W / (m · K) pour le remplissage acoustique |
| surface finie | White powder-coated exterior with brushed SUS304 horizontal worktop |
| Type joint | Welded rear plenum with a gasketed full-height filter frame and radiused worktop edge |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
HEPA or ULPA filter wallTabletop or freestanding baseStatic-dissipative work surfaceTask lighting and service outlets
Planning a Horizontal Laminar Flow Clean Bench specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
