English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الأرضيات الغرف النظيفة
تجانس PVC ورقة الأرضيات
A compact single-layer PVC floor covering whose color and pattern extend through the full 2 mm thickness for durable, repairable clean-area surfaces.
- Full-Thickness Wear Layer
- Heat-Welded Seams
- Compact 2 mm Construction
- Restorable PUR Surface
مقدمة المنتج
Homogeneous PVC sheet flooring is manufactured as one compact wear layer rather than a printed film over a backing. The through-pattern construction helps small abrasions remain less conspicuous and permits compatible surface-restoration methods during the service life. Two-metre-wide sheets reduce the number of field seams, and matching welding rod closes sheet junctions after adhesive installation. A factory PUR treatment supports routine machine cleaning without adding a separate site-applied coating.
الخصائص الرئيسية
Wide rolls cover corridors and rooms with fewer joints than modular tile layouts.
Hot-welded seams create a closed junction that resists routine wet cleaning when correctly installed.
A compact PUR-treated surface improves stain release and can be mechanically refreshed with compatible maintenance methods.
مخاوف المنتج للعملاء
A resilient clean-area floor must remain presentable under rolling traffic while limiting joints and avoiding a fragile decorative layer.
Surface scratches expose a visibly different backing layer on conventional printed flooring.The homogeneous construction carries the visual pattern through the full 2 mm gauge.
Numerous tile joints lengthen cleaning time and increase seam-maintenance points.Two-metre-wide sheets reduce joint count and accept color-matched heat welding.
Repeated polishing adds chemicals and labor to controlled-area maintenance.The factory PUR treatment supports routine cleaning and compatible dry-buff restoration.
تطبيقات نموذجية
Cleanroom support corridorsHealthcare preparation roomsLaboratory circulation areasGowning and changing roomsControlled manufacturing support spaces
المعلمات الفنية
Typical dimensions and material values for commercial Type I homogeneous PVC sheet flooring are shown below.
| المواد الأساسية | Single-layer compact PVC compound with mineral filler, color pigments and plasticizer |
|---|---|
| سمك اللوحة | 2.0 mm total homogeneous wear thickness |
| العرض الفعال | 2000 mm standard sheet width |
| الحد الأقصى الطول | Up to 23000 mm standard roll length |
| الصلب يواجه سمك | 0 mm; no steel facing is used in the PVC sheet |
| الكثافة الأساسية | Approximately 1375–1500 kg/m³ based on common 2.0 mm commercial sheet weights |
| الموصلية الحرارية | Approximately 0.20–0.25 W/(m·K) for compact homogeneous PVC |
| إنهاء السطح | Non-directional matte pattern with factory-applied PUR treatment |
| نوع المشترك | Fully adhered butt seams routed and closed with color-matched hot-welding rod |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Non-directional neutral and zoning colorsMatching hot-welding rodSite-formed coved skirting with cove formerSheet or 610 mm modular tile format
Planning a Homogeneous PVC Sheet Flooring specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
