Homogeneous PVC sheet flooring roll with matching welding rod

Sistem Lantai Bilik Bersih

Lantai Lembaran PVC Homogen

A compact single-layer PVC floor covering whose color and pattern extend through the full 2 mm thickness for durable, repairable clean-area surfaces.

Full-Thickness Wear Layer
Heat-Welded Seams
Compact 2 mm Construction
Restorable PUR Surface

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Homogeneous PVC sheet flooring is manufactured as one compact wear layer rather than a printed film over a backing. The through-pattern construction helps small abrasions remain less conspicuous and permits compatible surface-restoration methods during the service life. Two-metre-wide sheets reduce the number of field seams, and matching welding rod closes sheet junctions after adhesive installation. A factory PUR treatment supports routine machine cleaning without adding a separate site-applied coating.

Ciri-ciri Utama

Color and pattern continue through the entire wear layer instead of relying on a thin decorative print film.

Wide rolls cover corridors and rooms with fewer joints than modular tile layouts.

Hot-welded seams create a closed junction that resists routine wet cleaning when correctly installed.

A compact PUR-treated surface improves stain release and can be mechanically refreshed with compatible maintenance methods.

Kebimbangan Produk Pelanggan

A resilient clean-area floor must remain presentable under rolling traffic while limiting joints and avoiding a fragile decorative layer.

Surface scratches expose a visibly different backing layer on conventional printed flooring.The homogeneous construction carries the visual pattern through the full 2 mm gauge.

Numerous tile joints lengthen cleaning time and increase seam-maintenance points.Two-metre-wide sheets reduce joint count and accept color-matched heat welding.

Repeated polishing adds chemicals and labor to controlled-area maintenance.The factory PUR treatment supports routine cleaning and compatible dry-buff restoration.

Permohonan yang biasa

Cleanroom support corridorsHealthcare preparation roomsLaboratory circulation areasGowning and changing roomsControlled manufacturing support spaces

Parameter teknikal

Typical dimensions and material values for commercial Type I homogeneous PVC sheet flooring are shown below.

Bahan Teras	Single-layer compact PVC compound with mineral filler, color pigments and plasticizer
Ketebalan Panel	2.0 mm total homogeneous wear thickness
Lebar berkesan	2000 mm standard sheet width
Panjang maksimum	Up to 23000 mm standard roll length
Keluli Menghadapi Ketebalan	0 mm; no steel facing is used in the PVC sheet
Ketumpatan teras	Approximately 1375–1500 kg/m³ based on common 2.0 mm commercial sheet weights
Kekonduksian Terma	Approximately 0.20–0.25 W/(m·K) for compact homogeneous PVC
Kemasan permukaan	Non-directional matte pattern with factory-applied PUR treatment
Jenis Bersatu	Fully adhered butt seams routed and closed with color-matched hot-welding rod
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Non-directional neutral and zoning colorsMatching hot-welding rodSite-formed coved skirting with cove formerSheet or 610 mm modular tile format

Planning a Homogeneous PVC Sheet Flooring specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami