Homogeneous PVC sheet flooring roll with matching welding rod

클린룸 바닥 시스템

균질 PVC 시트 바닥

A compact single-layer PVC floor covering whose color and pattern extend through the full 2 mm thickness for durable, repairable clean-area surfaces.

Full-Thickness Wear Layer
Heat-Welded Seams
Compact 2 mm Construction
Restorable PUR Surface

견적 요청 제품 찾아보기

상품 소개

Homogeneous PVC sheet flooring is manufactured as one compact wear layer rather than a printed film over a backing. The through-pattern construction helps small abrasions remain less conspicuous and permits compatible surface-restoration methods during the service life. Two-metre-wide sheets reduce the number of field seams, and matching welding rod closes sheet junctions after adhesive installation. A factory PUR treatment supports routine machine cleaning without adding a separate site-applied coating.

주요 기능

Color and pattern continue through the entire wear layer instead of relying on a thin decorative print film.

Wide rolls cover corridors and rooms with fewer joints than modular tile layouts.

Hot-welded seams create a closed junction that resists routine wet cleaning when correctly installed.

A compact PUR-treated surface improves stain release and can be mechanically refreshed with compatible maintenance methods.

고객 제품 관심사

A resilient clean-area floor must remain presentable under rolling traffic while limiting joints and avoiding a fragile decorative layer.

Surface scratches expose a visibly different backing layer on conventional printed flooring.The homogeneous construction carries the visual pattern through the full 2 mm gauge.

Numerous tile joints lengthen cleaning time and increase seam-maintenance points.Two-metre-wide sheets reduce joint count and accept color-matched heat welding.

Repeated polishing adds chemicals and labor to controlled-area maintenance.The factory PUR treatment supports routine cleaning and compatible dry-buff restoration.

일반적인 응용 프로그램

Cleanroom support corridorsHealthcare preparation roomsLaboratory circulation areasGowning and changing roomsControlled manufacturing support spaces

기술 매개변수

Typical dimensions and material values for commercial Type I homogeneous PVC sheet flooring are shown below.

핵심 재료	Single-layer compact PVC compound with mineral filler, color pigments and plasticizer
패널 두께	2.0 mm total homogeneous wear thickness
유효 폭	2000 mm standard sheet width
최대 길이	Up to 23000 mm standard roll length
강철 면면 두께	0 mm; no steel facing is used in the PVC sheet
코어 밀도	Approximately 1375–1500 kg/m³ based on common 2.0 mm commercial sheet weights
열전도도 (Thermal Conductivity)	Approximately 0.20–0.25 W/(m·K) for compact homogeneous PVC
표면 마무리	Non-directional matte pattern with factory-applied PUR treatment
접합 유형	Fully adhered butt seams routed and closed with color-matched hot-welding rod
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Non-directional neutral and zoning colorsMatching hot-welding rodSite-formed coved skirting with cove formerSheet or 610 mm modular tile format

Planning a Homogeneous PVC Sheet Flooring specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.