Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Piso de lámina PVC homogéneo
A compact single-layer PVC floor covering whose color and pattern extend through the full 2 mm thickness for durable, repairable clean-area surfaces.
- Full-Thickness Wear Layer
- Heat-Welded Seams
- Compact 2 mm Construction
- Restorable PUR Surface
Introducción del producto
Homogeneous PVC sheet flooring is manufactured as one compact wear layer rather than a printed film over a backing. The through-pattern construction helps small abrasions remain less conspicuous and permits compatible surface-restoration methods during the service life. Two-metre-wide sheets reduce the number of field seams, and matching welding rod closes sheet junctions after adhesive installation. A factory PUR treatment supports routine machine cleaning without adding a separate site-applied coating.
Características clave
Wide rolls cover corridors and rooms with fewer joints than modular tile layouts.
Hot-welded seams create a closed junction that resists routine wet cleaning when correctly installed.
A compact PUR-treated surface improves stain release and can be mechanically refreshed with compatible maintenance methods.
Preocupaciones del producto del cliente
A resilient clean-area floor must remain presentable under rolling traffic while limiting joints and avoiding a fragile decorative layer.
Surface scratches expose a visibly different backing layer on conventional printed flooring.The homogeneous construction carries the visual pattern through the full 2 mm gauge.
Numerous tile joints lengthen cleaning time and increase seam-maintenance points.Two-metre-wide sheets reduce joint count and accept color-matched heat welding.
Repeated polishing adds chemicals and labor to controlled-area maintenance.The factory PUR treatment supports routine cleaning and compatible dry-buff restoration.
Aplicaciones típicas
Cleanroom support corridorsHealthcare preparation roomsLaboratory circulation areasGowning and changing roomsControlled manufacturing support spaces
Parámetros técnicos
Typical dimensions and material values for commercial Type I homogeneous PVC sheet flooring are shown below.
| Materiales Core | Single-layer compact PVC compound with mineral filler, color pigments and plasticizer |
|---|---|
| Panel de espesor | 2.0 mm total homogeneous wear thickness |
| Ancho efectivo | 2000 mm standard sheet width |
| Longitud máxima | Up to 23000 mm standard roll length |
| Acero frente a espesor | 0 mm; no steel facing is used in the PVC sheet |
| Densidad Core | Approximately 1375–1500 kg/m³ based on common 2.0 mm commercial sheet weights |
| Conductividad térmica | Approximately 0.20–0.25 W/(m·K) for compact homogeneous PVC |
| Superficie acabada | Non-directional matte pattern with factory-applied PUR treatment |
| Tipo conjunto | Fully adhered butt seams routed and closed with color-matched hot-welding rod |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Non-directional neutral and zoning colorsMatching hot-welding rodSite-formed coved skirting with cove formerSheet or 610 mm modular tile format
Planning a Homogeneous PVC Sheet Flooring specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
