Homogeneous PVC sheet flooring roll with matching welding rod

クリーンルームフロアシステム

均質な PVC シートフローリング

A compact single-layer PVC floor covering whose color and pattern extend through the full 2 mm thickness for durable, repairable clean-area surfaces.

Full-Thickness Wear Layer
Heat-Welded Seams
Compact 2 mm Construction
Restorable PUR Surface

見積もりリクエスト製品案内

商品紹介

Homogeneous PVC sheet flooring is manufactured as one compact wear layer rather than a printed film over a backing. The through-pattern construction helps small abrasions remain less conspicuous and permits compatible surface-restoration methods during the service life. Two-metre-wide sheets reduce the number of field seams, and matching welding rod closes sheet junctions after adhesive installation. A factory PUR treatment supports routine machine cleaning without adding a separate site-applied coating.

主要な特徴

Color and pattern continue through the entire wear layer instead of relying on a thin decorative print film.

Wide rolls cover corridors and rooms with fewer joints than modular tile layouts.

Hot-welded seams create a closed junction that resists routine wet cleaning when correctly installed.

A compact PUR-treated surface improves stain release and can be mechanically refreshed with compatible maintenance methods.

お客様の製品に関する懸念事項

A resilient clean-area floor must remain presentable under rolling traffic while limiting joints and avoiding a fragile decorative layer.

Surface scratches expose a visibly different backing layer on conventional printed flooring.The homogeneous construction carries the visual pattern through the full 2 mm gauge.

Numerous tile joints lengthen cleaning time and increase seam-maintenance points.Two-metre-wide sheets reduce joint count and accept color-matched heat welding.

Repeated polishing adds chemicals and labor to controlled-area maintenance.The factory PUR treatment supports routine cleaning and compatible dry-buff restoration.

典型的な用途

Cleanroom support corridorsHealthcare preparation rooms実験室循環エリアGowning and changing roomsControlled manufacturing support spaces

技術的なパラメータ

Typical dimensions and material values for commercial Type I homogeneous PVC sheet flooring are shown below.

コア材料	Single-layer compact PVC compound with mineral filler, color pigments and plasticizer
パネルの厚さ	2.0 mm total homogeneous wear thickness
有効幅	2000 mm standard sheet width
最大長さ	Up to 23000 mm standard roll length
鋼鉄の厚さを直面する	0 mm; no steel facing is used in the PVC sheet
コア密度	Approximately 1375–1500 kg/m³ based on common 2.0 mm commercial sheet weights
熱伝導率	Approximately 0.20–0.25 W/(m·K) for compact homogeneous PVC
表面仕上げ	Non-directional matte pattern with factory-applied PUR treatment
ジョイントタイプ	Fully adhered butt seams routed and closed with color-matched hot-welding rod
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Non-directional neutral and zoning colorsMatching hot-welding rodSite-formed coved skirting with cove formerSheet or 610 mm modular tile format

Planning a Homogeneous PVC Sheet Flooring specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する