Homogeneous PVC sheet flooring roll with matching welding rod

Temiz Oda zemin sistemleri

Homojen PVC Sheet Flooring

A compact single-layer PVC floor covering whose color and pattern extend through the full 2 mm thickness for durable, repairable clean-area surfaces.

Full-Thickness Wear Layer
Heat-Welded Seams
Compact 2 mm Construction
Restorable PUR Surface

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Homogeneous PVC sheet flooring is manufactured as one compact wear layer rather than a printed film over a backing. The through-pattern construction helps small abrasions remain less conspicuous and permits compatible surface-restoration methods during the service life. Two-metre-wide sheets reduce the number of field seams, and matching welding rod closes sheet junctions after adhesive installation. A factory PUR treatment supports routine machine cleaning without adding a separate site-applied coating.

Ana Özellikler

Color and pattern continue through the entire wear layer instead of relying on a thin decorative print film.

Wide rolls cover corridors and rooms with fewer joints than modular tile layouts.

Hot-welded seams create a closed junction that resists routine wet cleaning when correctly installed.

A compact PUR-treated surface improves stain release and can be mechanically refreshed with compatible maintenance methods.

Müşteri Ürün Sorunları

A resilient clean-area floor must remain presentable under rolling traffic while limiting joints and avoiding a fragile decorative layer.

Surface scratches expose a visibly different backing layer on conventional printed flooring.The homogeneous construction carries the visual pattern through the full 2 mm gauge.

Numerous tile joints lengthen cleaning time and increase seam-maintenance points.Two-metre-wide sheets reduce joint count and accept color-matched heat welding.

Repeated polishing adds chemicals and labor to controlled-area maintenance.The factory PUR treatment supports routine cleaning and compatible dry-buff restoration.

Tipik uygulamalar

Cleanroom support corridorsHealthcare preparation roomsLaboratory circulation areasGowning and changing roomsControlled manufacturing support spaces

Teknik parametreler

Typical dimensions and material values for commercial Type I homogeneous PVC sheet flooring are shown below.

Temel malzemeler	Single-layer compact PVC compound with mineral filler, color pigments and plasticizer
Panel kalınlığı	2.0 mm total homogeneous wear thickness
Effective Width (Etkili Genişlik)	2000 mm standard sheet width
Maksimum uzunluk	Up to 23000 mm standard roll length
Çelik yüz yüze kalınlığı	0 mm; no steel facing is used in the PVC sheet
Core Density (Çekirdek Yoğunluğu)	Approximately 1375–1500 kg/m³ based on common 2.0 mm commercial sheet weights
Termal İletkenlik	Approximately 0.20–0.25 W/(m·K) for compact homogeneous PVC
Yüzey bitirme	Non-directional matte pattern with factory-applied PUR treatment
Ortak tip	Fully adhered butt seams routed and closed with color-matched hot-welding rod
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Non-directional neutral and zoning colorsMatching hot-welding rodSite-formed coved skirting with cove formerSheet or 610 mm modular tile format

Planning a Homogeneous PVC Sheet Flooring specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun