English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الأرضيات الغرف النظيفة
الأرضيات الأسمنتية البولي يوريثين الثقيلة
An aggregate-filled polyurethane cement screed engineered for wet process floors exposed to thermal cycling, impact and aggressive washdown.
- Thermal-Shock Resistance
- 6–9 mm Heavy-Duty Build
- Wet-Process Durability
- Impact and Chemical Resistance
مقدمة المنتج
Heavy-duty polyurethane cement flooring combines a water-dispersed polyurethane binder with cementitious components, pigments and graded aggregate. Its coefficient of thermal expansion is closer to concrete than a conventional resin coating, helping the system remain bonded during repeated hot-water cleaning and cold-service cycles. The 6–9 mm screed provides deep mechanical protection and a textured, liquid-impermeable finish for demanding wet production. Properly formed falls, coves, drain edges and retained structural joints complete the hygienic floor envelope.
الخصائص الرئيسية
A thick aggregate structure absorbs impact and abrasion from pallets, racks and mobile processing equipment.
Textured finishes maintain practical traction where water, detergent or process residue may reach the floor.
Monolithic coves and detailed drain interfaces reduce vulnerable grout lines in frequent washdown areas.
مخاوف المنتج للعملاء
Wet process floors face thermal shock, aggressive sanitation, impact and standing liquid at the same time, which can overwhelm a thin decorative coating.
Hot wash water causes a rigid coating to crack or debond from cool concrete.The polyurethane-cement matrix moves more compatibly with concrete through repeated thermal cycling.
Dropped tools and loaded pallet wheels break through a thin resin layer.A 6–9 mm aggregate-rich screed provides deeper impact and abrasion capacity.
Smooth flooring becomes hazardous during foaming and rinse-down.Selected broadcast aggregate creates a defined wet-area traction profile without open tile joints.
Water enters around drains and cove junctions, then attacks the bond from below.Rebated drain edges, integral coves and sealed penetrations continue the polyurethane cement system through critical details.
تطبيقات نموذجية
Pharmaceutical washdown roomsBiotechnology wet process areasFood and beverage clean productionCold rooms and freezersChemical and formulation plants
المعلمات الفنية
The following ranges describe a heavy-duty polyurethane cement screed for wet and thermally demanding service.
| المواد الأساسية | Water-dispersed polyurethane binder, cementitious component, pigment and graded mineral aggregate |
|---|---|
| سمك اللوحة | 6.0–9.0 mm nominal heavy-duty screed thickness |
| العرض الفعال | Typically 1500–3000 mm rake or trowel placement strip width |
| الحد الأقصى الطول | Typically up to 9000 mm work section before planned construction joints |
| الصلب يواجه سمك | 0 mm; the wearing surface is polyurethane cement, not steel sheet |
| الكثافة الأساسية | Approximately 1900–2100 kg/m³ for the cured aggregate-filled screed |
| الموصلية الحرارية | Typically 0.60–0.90 W/(m·K) for dense polyurethane cement flooring |
| إنهاء السطح | Matte solid-color surface with medium or heavy slip-resistant aggregate profile |
| نوع المشترك | Rebated and primer-bonded screed with anchored edges, integral coves and existing movement joints carried through |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
6 mm general heavy-duty or 9 mm thermal-service buildMedium or heavy wet-slip textureIntegral cove and stainless drain-edge detailSolid-color or color-stable protective topcoat
Planning a Heavy-Duty Polyurethane Cement Flooring specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
