Heavy-duty polyurethane cement flooring slab in three-quarter view with a matte oxide-red surface and concrete base

Системы полы для чистых комнат

Тяжелые полиуретанные цементные полы

An aggregate-filled polyurethane cement screed engineered for wet process floors exposed to thermal cycling, impact and aggressive washdown.

Thermal-Shock Resistance
6–9 mm Heavy-Duty Build
Wet-Process Durability
Impact and Chemical Resistance

Запрос котировки Просмотреть продукты

Введение продукции

Heavy-duty polyurethane cement flooring combines a water-dispersed polyurethane binder with cementitious components, pigments and graded aggregate. Its coefficient of thermal expansion is closer to concrete than a conventional resin coating, helping the system remain bonded during repeated hot-water cleaning and cold-service cycles. The 6–9 mm screed provides deep mechanical protection and a textured, liquid-impermeable finish for demanding wet production. Properly formed falls, coves, drain edges and retained structural joints complete the hygienic floor envelope.

Основные характеристики

The polyurethane-cement hybrid tolerates wider service-temperature changes than conventional thin resin coatings.

A thick aggregate structure absorbs impact and abrasion from pallets, racks and mobile processing equipment.

Textured finishes maintain practical traction where water, detergent or process residue may reach the floor.

Monolithic coves and detailed drain interfaces reduce vulnerable grout lines in frequent washdown areas.

Обеспокоенность клиентов продуктами

Wet process floors face thermal shock, aggressive sanitation, impact and standing liquid at the same time, which can overwhelm a thin decorative coating.

Hot wash water causes a rigid coating to crack or debond from cool concrete.The polyurethane-cement matrix moves more compatibly with concrete through repeated thermal cycling.

Dropped tools and loaded pallet wheels break through a thin resin layer.A 6–9 mm aggregate-rich screed provides deeper impact and abrasion capacity.

Smooth flooring becomes hazardous during foaming and rinse-down.Selected broadcast aggregate creates a defined wet-area traction profile without open tile joints.

Water enters around drains and cove junctions, then attacks the bond from below.Rebated drain edges, integral coves and sealed penetrations continue the polyurethane cement system through critical details.

Типичные приложения

Pharmaceutical washdown roomsBiotechnology wet process areasFood and beverage clean productionCold rooms and freezersChemical and formulation plants

Технические параметры

The following ranges describe a heavy-duty polyurethane cement screed for wet and thermally demanding service.

Основной материал	Water-dispersed polyurethane binder, cementitious component, pigment and graded mineral aggregate
Толщина панели	6.0–9.0 mm nominal heavy-duty screed thickness
эффективная ширина	Typically 1500–3000 mm rake or trowel placement strip width
Максимальная длина	Typically up to 9000 mm work section before planned construction joints
Толщина линий стали	0 mm; the wearing surface is polyurethane cement, not steel sheet
Плотность ядра	Approximately 1900–2100 kg/m³ for the cured aggregate-filled screed
Теплопроводимость	Typically 0.60–0.90 W/(m·K) for dense polyurethane cement flooring
Поверхностная отделка	Matte solid-color surface with medium or heavy slip-resistant aggregate profile
Объединенный тип	Rebated and primer-bonded screed with anchored edges, integral coves and existing movement joints carried through
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

6 mm general heavy-duty or 9 mm thermal-service buildMedium or heavy wet-slip textureIntegral cove and stainless drain-edge detailSolid-color or color-stable protective topcoat

Planning a Heavy-Duty Polyurethane Cement Flooring specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой