Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Piso de cemento de poliuretano pesado
An aggregate-filled polyurethane cement screed engineered for wet process floors exposed to thermal cycling, impact and aggressive washdown.
- Thermal-Shock Resistance
- 6–9 mm Heavy-Duty Build
- Wet-Process Durability
- Impact and Chemical Resistance
Introducción del producto
Heavy-duty polyurethane cement flooring combines a water-dispersed polyurethane binder with cementitious components, pigments and graded aggregate. Its coefficient of thermal expansion is closer to concrete than a conventional resin coating, helping the system remain bonded during repeated hot-water cleaning and cold-service cycles. The 6–9 mm screed provides deep mechanical protection and a textured, liquid-impermeable finish for demanding wet production. Properly formed falls, coves, drain edges and retained structural joints complete the hygienic floor envelope.
Características clave
A thick aggregate structure absorbs impact and abrasion from pallets, racks and mobile processing equipment.
Textured finishes maintain practical traction where water, detergent or process residue may reach the floor.
Monolithic coves and detailed drain interfaces reduce vulnerable grout lines in frequent washdown areas.
Preocupaciones del producto del cliente
Wet process floors face thermal shock, aggressive sanitation, impact and standing liquid at the same time, which can overwhelm a thin decorative coating.
Hot wash water causes a rigid coating to crack or debond from cool concrete.The polyurethane-cement matrix moves more compatibly with concrete through repeated thermal cycling.
Dropped tools and loaded pallet wheels break through a thin resin layer.A 6–9 mm aggregate-rich screed provides deeper impact and abrasion capacity.
Smooth flooring becomes hazardous during foaming and rinse-down.Selected broadcast aggregate creates a defined wet-area traction profile without open tile joints.
Water enters around drains and cove junctions, then attacks the bond from below.Rebated drain edges, integral coves and sealed penetrations continue the polyurethane cement system through critical details.
Aplicaciones típicas
Pharmaceutical washdown roomsBiotechnology wet process areasFood and beverage clean productionCold rooms and freezersChemical and formulation plants
Parámetros técnicos
The following ranges describe a heavy-duty polyurethane cement screed for wet and thermally demanding service.
| Materiales Core | Water-dispersed polyurethane binder, cementitious component, pigment and graded mineral aggregate |
|---|---|
| Panel de espesor | 6.0–9.0 mm nominal heavy-duty screed thickness |
| Ancho efectivo | Typically 1500–3000 mm rake or trowel placement strip width |
| Longitud máxima | Typically up to 9000 mm work section before planned construction joints |
| Acero frente a espesor | 0 mm; the wearing surface is polyurethane cement, not steel sheet |
| Densidad Core | Approximately 1900–2100 kg/m³ for the cured aggregate-filled screed |
| Conductividad térmica | Typically 0.60–0.90 W/(m·K) for dense polyurethane cement flooring |
| Superficie acabada | Matte solid-color surface with medium or heavy slip-resistant aggregate profile |
| Tipo conjunto | Rebated and primer-bonded screed with anchored edges, integral coves and existing movement joints carried through |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
6 mm general heavy-duty or 9 mm thermal-service buildMedium or heavy wet-slip textureIntegral cove and stainless drain-edge detailSolid-color or color-stable protective topcoat
Planning a Heavy-Duty Polyurethane Cement Flooring specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
