Heavy-duty polyurethane cement flooring slab in three-quarter view with a matte oxide-red surface and concrete base

클린룸 바닥 시스템

중형 폴리우레탄 시멘트 바닥재

An aggregate-filled polyurethane cement screed engineered for wet process floors exposed to thermal cycling, impact and aggressive washdown.

Thermal-Shock Resistance
6–9 mm Heavy-Duty Build
Wet-Process Durability
Impact and Chemical Resistance

견적 요청 제품 찾아보기

상품 소개

Heavy-duty polyurethane cement flooring combines a water-dispersed polyurethane binder with cementitious components, pigments and graded aggregate. Its coefficient of thermal expansion is closer to concrete than a conventional resin coating, helping the system remain bonded during repeated hot-water cleaning and cold-service cycles. The 6–9 mm screed provides deep mechanical protection and a textured, liquid-impermeable finish for demanding wet production. Properly formed falls, coves, drain edges and retained structural joints complete the hygienic floor envelope.

주요 기능

The polyurethane-cement hybrid tolerates wider service-temperature changes than conventional thin resin coatings.

A thick aggregate structure absorbs impact and abrasion from pallets, racks and mobile processing equipment.

Textured finishes maintain practical traction where water, detergent or process residue may reach the floor.

Monolithic coves and detailed drain interfaces reduce vulnerable grout lines in frequent washdown areas.

고객 제품 관심사

Wet process floors face thermal shock, aggressive sanitation, impact and standing liquid at the same time, which can overwhelm a thin decorative coating.

Hot wash water causes a rigid coating to crack or debond from cool concrete.The polyurethane-cement matrix moves more compatibly with concrete through repeated thermal cycling.

Dropped tools and loaded pallet wheels break through a thin resin layer.A 6–9 mm aggregate-rich screed provides deeper impact and abrasion capacity.

Smooth flooring becomes hazardous during foaming and rinse-down.Selected broadcast aggregate creates a defined wet-area traction profile without open tile joints.

Water enters around drains and cove junctions, then attacks the bond from below.Rebated drain edges, integral coves and sealed penetrations continue the polyurethane cement system through critical details.

일반적인 응용 프로그램

Pharmaceutical washdown roomsBiotechnology wet process areasFood and beverage clean productionCold rooms and freezersChemical and formulation plants

기술 매개변수

The following ranges describe a heavy-duty polyurethane cement screed for wet and thermally demanding service.

핵심 재료	Water-dispersed polyurethane binder, cementitious component, pigment and graded mineral aggregate
패널 두께	6.0–9.0 mm nominal heavy-duty screed thickness
유효 폭	Typically 1500–3000 mm rake or trowel placement strip width
최대 길이	Typically up to 9000 mm work section before planned construction joints
강철 면면 두께	0 mm; the wearing surface is polyurethane cement, not steel sheet
코어 밀도	Approximately 1900–2100 kg/m³ for the cured aggregate-filled screed
열전도도 (Thermal Conductivity)	Typically 0.60–0.90 W/(m·K) for dense polyurethane cement flooring
표면 마무리	Matte solid-color surface with medium or heavy slip-resistant aggregate profile
접합 유형	Rebated and primer-bonded screed with anchored edges, integral coves and existing movement joints carried through
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

6 mm general heavy-duty or 9 mm thermal-service buildMedium or heavy wet-slip textureIntegral cove and stainless drain-edge detailSolid-color or color-stable protective topcoat

Planning a Heavy-Duty Polyurethane Cement Flooring specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.