Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom Flooring Systems
Ciment de ciment de polyuréthane
An aggregate-filled polyurethane cement screed engineered for wet process floors exposed to thermal cycling, impact and aggressive washdown.
- Thermal-Shock Resistance
- 6–9 mm Heavy-Duty Build
- Wet-Process Durability
- Impact and Chemical Resistance
Introduction de produit
Heavy-duty polyurethane cement flooring combines a water-dispersed polyurethane binder with cementitious components, pigments and graded aggregate. Its coefficient of thermal expansion is closer to concrete than a conventional resin coating, helping the system remain bonded during repeated hot-water cleaning and cold-service cycles. The 6–9 mm screed provides deep mechanical protection and a textured, liquid-impermeable finish for demanding wet production. Properly formed falls, coves, drain edges and retained structural joints complete the hygienic floor envelope.
Key Features
A thick aggregate structure absorbs impact and abrasion from pallets, racks and mobile processing equipment.
Textured finishes maintain practical traction where water, detergent or process residue may reach the floor.
Monolithic coves and detailed drain interfaces reduce vulnerable grout lines in frequent washdown areas.
Préoccupations du client produit
Wet process floors face thermal shock, aggressive sanitation, impact and standing liquid at the same time, which can overwhelm a thin decorative coating.
Hot wash water causes a rigid coating to crack or debond from cool concrete.The polyurethane-cement matrix moves more compatibly with concrete through repeated thermal cycling.
Dropped tools and loaded pallet wheels break through a thin resin layer.A 6–9 mm aggregate-rich screed provides deeper impact and abrasion capacity.
Smooth flooring becomes hazardous during foaming and rinse-down.Selected broadcast aggregate creates a defined wet-area traction profile without open tile joints.
Water enters around drains and cove junctions, then attacks the bond from below.Rebated drain edges, integral coves and sealed penetrations continue the polyurethane cement system through critical details.
Les applications typiques
Pharmaceutical washdown roomsBiotechnology wet process areasFood and beverage clean productionCold rooms and freezersChemical and formulation plants
Paramètres techniques
The following ranges describe a heavy-duty polyurethane cement screed for wet and thermally demanding service.
| Matériaux de base | Water-dispersed polyurethane binder, cementitious component, pigment and graded mineral aggregate |
|---|---|
| Panneau épaisseur | 6.0–9.0 mm nominal heavy-duty screed thickness |
| Largeur effective | Typically 1500–3000 mm rake or trowel placement strip width |
| Longueur maximale | Typically up to 9000 mm work section before planned construction joints |
| Acier face épaisseur | 0 mm; the wearing surface is polyurethane cement, not steel sheet |
| Densité Core | Approximately 1900–2100 kg/m³ for the cured aggregate-filled screed |
| Conductivité thermique | Typically 0.60–0.90 W/(m·K) for dense polyurethane cement flooring |
| surface finie | Matte solid-color surface with medium or heavy slip-resistant aggregate profile |
| Type joint | Rebated and primer-bonded screed with anchored edges, integral coves and existing movement joints carried through |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
6 mm general heavy-duty or 9 mm thermal-service buildMedium or heavy wet-slip textureIntegral cove and stainless drain-edge detailSolid-color or color-stable protective topcoat
Planning a Heavy-Duty Polyurethane Cement Flooring specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
