Heavy-duty polyurethane cement flooring slab in three-quarter view with a matte oxide-red surface and concrete base

Cleanroom Flooring Sistem

Lantai semen poliuretan tugas berat

An aggregate-filled polyurethane cement screed engineered for wet process floors exposed to thermal cycling, impact and aggressive washdown.

Thermal-Shock Resistance
6–9 mm Heavy-Duty Build
Wet-Process Durability
Impact and Chemical Resistance

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Heavy-duty polyurethane cement flooring combines a water-dispersed polyurethane binder with cementitious components, pigments and graded aggregate. Its coefficient of thermal expansion is closer to concrete than a conventional resin coating, helping the system remain bonded during repeated hot-water cleaning and cold-service cycles. The 6–9 mm screed provides deep mechanical protection and a textured, liquid-impermeable finish for demanding wet production. Properly formed falls, coves, drain edges and retained structural joints complete the hygienic floor envelope.

Fitur utama:

The polyurethane-cement hybrid tolerates wider service-temperature changes than conventional thin resin coatings.

A thick aggregate structure absorbs impact and abrasion from pallets, racks and mobile processing equipment.

Textured finishes maintain practical traction where water, detergent or process residue may reach the floor.

Monolithic coves and detailed drain interfaces reduce vulnerable grout lines in frequent washdown areas.

Kekhawatiran produk pelanggan

Wet process floors face thermal shock, aggressive sanitation, impact and standing liquid at the same time, which can overwhelm a thin decorative coating.

Hot wash water causes a rigid coating to crack or debond from cool concrete.The polyurethane-cement matrix moves more compatibly with concrete through repeated thermal cycling.

Dropped tools and loaded pallet wheels break through a thin resin layer.A 6–9 mm aggregate-rich screed provides deeper impact and abrasion capacity.

Smooth flooring becomes hazardous during foaming and rinse-down.Selected broadcast aggregate creates a defined wet-area traction profile without open tile joints.

Water enters around drains and cove junctions, then attacks the bond from below.Rebated drain edges, integral coves and sealed penetrations continue the polyurethane cement system through critical details.

Aplikasi yang Tipis

Pharmaceutical washdown roomsBiotechnology wet process areasFood and beverage clean productionCold rooms and freezersChemical and formulation plants

Parameter teknis

The following ranges describe a heavy-duty polyurethane cement screed for wet and thermally demanding service.

Bahan inti	Water-dispersed polyurethane binder, cementitious component, pigment and graded mineral aggregate
Ketebalan Panel (Panel Thickness)	6.0–9.0 mm nominal heavy-duty screed thickness
Efektif lebar	Typically 1500–3000 mm rake or trowel placement strip width
Panjang maksimum	Typically up to 9000 mm work section before planned construction joints
Baja menghadap ketebalan	0 mm; the wearing surface is polyurethane cement, not steel sheet
Kepadatan inti (core density)	Approximately 1900–2100 kg/m³ for the cured aggregate-filled screed
Konduktivitas Termal (Thermal Conductivity)	Typically 0.60–0.90 W/(m·K) for dense polyurethane cement flooring
Permukaan selesai	Matte solid-color surface with medium or heavy slip-resistant aggregate profile
Jenis Bersama	Rebated and primer-bonded screed with anchored edges, integral coves and existing movement joints carried through
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

6 mm general heavy-duty or 9 mm thermal-service buildMedium or heavy wet-slip textureIntegral cove and stainless drain-edge detailSolid-color or color-stable protective topcoat

Planning a Heavy-Duty Polyurethane Cement Flooring specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami