English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات تهوية وتكييف ومعالجة الهواء في الغرف النظيفة
المبادل الحراري لوحة وإطار
A compact counter-current heat exchanger that separates two hydronic circuits through a removable pack of corrugated stainless steel plates.
- Compact Counter-Current Transfer
- Expandable Plate Pack
- Accessible Gasketed Channels
- Hydraulic Circuit Separation
مقدمة المنتج
Corrugated stainless plates are compressed between a fixed frame and a movable pressure plate to create alternating hot and cold channels. Elastomer gaskets direct each fluid through its assigned channels without mixing. Turbulent counter-current flow supports close temperature approach in a much smaller footprint than many shell-and-tube arrangements, while loosening the tie bolts opens the pack for inspection or capacity changes.
الخصائص الرئيسية
Alternating gasketed channels keep building water separate from clean process, glycol or heat-recovery circuits.
The plate pack can be opened for mechanical cleaning and individual plate or gasket replacement.
Additional compatible plates increase surface area without replacing the main frame.
مخاوف المنتج للعملاء
A hydronic interface must transfer the design load with low approach temperature while keeping unlike water circuits isolated.
A shell-and-tube exchanger consumes excessive plantroom space.Thin corrugated plates concentrate a large transfer area inside a narrow frame.
One dirty circuit contaminates a clean secondary water loop.Independent gasketed channels maintain physical separation between the two fluids.
Future load expansion makes a fixed exchanger undersized.The frame can accept additional plates within its tightening-bolt capacity.
Deposits reduce performance but the transfer surface is inaccessible.Releasing the tie bolts exposes both sides of every removable plate for cleaning.
تطبيقات نموذجية
Cleanroom chilled-water isolationHeat-recovery water loopsDistrict-cooling interface stationsProcess-water temperature controlBoiler and low-temperature hot-water separation
المعلمات الفنية
Representative construction data for a commercial HVAC gasketed plate exchanger are provided below.
| المواد الأساسية | Corrugated AISI 304 or 316 stainless steel plate pack with elastomer gaskets |
|---|---|
| سمك اللوحة | 0.4-0.7 mm heat-transfer plate thickness |
| العرض الفعال | 250-1200 mm plate and frame width |
| الحد الأقصى الطول | Up to 2400 mm frame depth along the plate-pack compression axis |
| الصلب يواجه سمك | 12-40 mm carbon-steel fixed and pressure plates |
| الكثافة الأساسية | Approximately 7900-8000 kg/m³ for stainless heat-transfer plates |
| الموصلية الحرارية | Approximately 14-16 W/(m·K) for austenitic stainless plate material |
| إنهاء السطح | Pressed stainless plate surface with epoxy-painted carbon-steel frame |
| نوع المشترك | Gasketed alternating plate channels compressed by bolted tie rods with flanged ports |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
AISI 304, AISI 316 or titanium platesEPDM, NBR or high-temperature gasket materialsSingle-pass or multi-pass channel arrangementInsulation cover, drip tray and expandable plate count
Planning a Gasketed Plate-and-Frame Heat Exchanger specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
