Blue gasketed plate-and-frame heat exchanger with four flanged ports

ОВК и оборудование для обработки воздуха в чистых помещениях

Прокладный пластино-рамный теплообменник

A compact counter-current heat exchanger that separates two hydronic circuits through a removable pack of corrugated stainless steel plates.

Compact Counter-Current Transfer
Expandable Plate Pack
Accessible Gasketed Channels
Hydraulic Circuit Separation

Запрос котировки Просмотреть продукты

Введение продукции

Corrugated stainless plates are compressed between a fixed frame and a movable pressure plate to create alternating hot and cold channels. Elastomer gaskets direct each fluid through its assigned channels without mixing. Turbulent counter-current flow supports close temperature approach in a much smaller footprint than many shell-and-tube arrangements, while loosening the tie bolts opens the pack for inspection or capacity changes.

Основные характеристики

Chevron plate patterns promote turbulent flow and high heat-transfer coefficients at moderate velocity.

Alternating gasketed channels keep building water separate from clean process, glycol or heat-recovery circuits.

The plate pack can be opened for mechanical cleaning and individual plate or gasket replacement.

Additional compatible plates increase surface area without replacing the main frame.

Обеспокоенность клиентов продуктами

A hydronic interface must transfer the design load with low approach temperature while keeping unlike water circuits isolated.

A shell-and-tube exchanger consumes excessive plantroom space.Thin corrugated plates concentrate a large transfer area inside a narrow frame.

One dirty circuit contaminates a clean secondary water loop.Independent gasketed channels maintain physical separation between the two fluids.

Future load expansion makes a fixed exchanger undersized.The frame can accept additional plates within its tightening-bolt capacity.

Deposits reduce performance but the transfer surface is inaccessible.Releasing the tie bolts exposes both sides of every removable plate for cleaning.

Типичные приложения

Cleanroom chilled-water isolationHeat-recovery water loopsDistrict-cooling interface stationsProcess-water temperature controlBoiler and low-temperature hot-water separation

Технические параметры

Representative construction data for a commercial HVAC gasketed plate exchanger are provided below.

Основной материал	Corrugated AISI 304 or 316 stainless steel plate pack with elastomer gaskets
Толщина панели	0.4-0.7 mm heat-transfer plate thickness
эффективная ширина	250-1200 mm plate and frame width
Максимальная длина	Up to 2400 mm frame depth along the plate-pack compression axis
Толщина линий стали	12-40 mm carbon-steel fixed and pressure plates
Плотность ядра	Approximately 7900-8000 kg/m³ for stainless heat-transfer plates
Теплопроводимость	Approximately 14-16 W/(m·K) for austenitic stainless plate material
Поверхностная отделка	Pressed stainless plate surface with epoxy-painted carbon-steel frame
Объединенный тип	Gasketed alternating plate channels compressed by bolted tie rods with flanged ports
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

AISI 304, AISI 316 or titanium platesEPDM, NBR or high-temperature gasket materialsSingle-pass or multi-pass channel arrangementInsulation cover, drip tray and expandable plate count

Planning a Gasketed Plate-and-Frame Heat Exchanger specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой