Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Intercambiador de calor Plate and Frame por
A compact counter-current heat exchanger that separates two hydronic circuits through a removable pack of corrugated stainless steel plates.
- Compact Counter-Current Transfer
- Expandable Plate Pack
- Accessible Gasketed Channels
- Hydraulic Circuit Separation
Introducción del producto
Corrugated stainless plates are compressed between a fixed frame and a movable pressure plate to create alternating hot and cold channels. Elastomer gaskets direct each fluid through its assigned channels without mixing. Turbulent counter-current flow supports close temperature approach in a much smaller footprint than many shell-and-tube arrangements, while loosening the tie bolts opens the pack for inspection or capacity changes.
Características clave
Alternating gasketed channels keep building water separate from clean process, glycol or heat-recovery circuits.
The plate pack can be opened for mechanical cleaning and individual plate or gasket replacement.
Additional compatible plates increase surface area without replacing the main frame.
Preocupaciones del producto del cliente
A hydronic interface must transfer the design load with low approach temperature while keeping unlike water circuits isolated.
A shell-and-tube exchanger consumes excessive plantroom space.Thin corrugated plates concentrate a large transfer area inside a narrow frame.
One dirty circuit contaminates a clean secondary water loop.Independent gasketed channels maintain physical separation between the two fluids.
Future load expansion makes a fixed exchanger undersized.The frame can accept additional plates within its tightening-bolt capacity.
Deposits reduce performance but the transfer surface is inaccessible.Releasing the tie bolts exposes both sides of every removable plate for cleaning.
Aplicaciones típicas
Cleanroom chilled-water isolationHeat-recovery water loopsDistrict-cooling interface stationsProcess-water temperature controlBoiler and low-temperature hot-water separation
Parámetros técnicos
Representative construction data for a commercial HVAC gasketed plate exchanger are provided below.
| Materiales Core | Corrugated AISI 304 or 316 stainless steel plate pack with elastomer gaskets |
|---|---|
| Panel de espesor | 0.4-0.7 mm heat-transfer plate thickness |
| Ancho efectivo | 250-1200 mm plate and frame width |
| Longitud máxima | Up to 2400 mm frame depth along the plate-pack compression axis |
| Acero frente a espesor | 12-40 mm carbon-steel fixed and pressure plates |
| Densidad Core | Approximately 7900-8000 kg/m³ for stainless heat-transfer plates |
| Conductividad térmica | Approximately 14-16 W/(m·K) for austenitic stainless plate material |
| Superficie acabada | Pressed stainless plate surface with epoxy-painted carbon-steel frame |
| Tipo conjunto | Gasketed alternating plate channels compressed by bolted tie rods with flanged ports |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
AISI 304, AISI 316 or titanium platesEPDM, NBR or high-temperature gasket materialsSingle-pass or multi-pass channel arrangementInsulation cover, drip tray and expandable plate count
Planning a Gasketed Plate-and-Frame Heat Exchanger specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
