Blue gasketed plate-and-frame heat exchanger with four flanged ports

クリーンルーム HVAC および空気処理装置

Gasketed プレートおよびフレームの熱交換器

A compact counter-current heat exchanger that separates two hydronic circuits through a removable pack of corrugated stainless steel plates.

Compact Counter-Current Transfer
Expandable Plate Pack
Accessible Gasketed Channels
Hydraulic Circuit Separation

見積もりリクエスト製品案内

商品紹介

Corrugated stainless plates are compressed between a fixed frame and a movable pressure plate to create alternating hot and cold channels. Elastomer gaskets direct each fluid through its assigned channels without mixing. Turbulent counter-current flow supports close temperature approach in a much smaller footprint than many shell-and-tube arrangements, while loosening the tie bolts opens the pack for inspection or capacity changes.

主要な特徴

Chevron plate patterns promote turbulent flow and high heat-transfer coefficients at moderate velocity.

Alternating gasketed channels keep building water separate from clean process, glycol or heat-recovery circuits.

The plate pack can be opened for mechanical cleaning and individual plate or gasket replacement.

Additional compatible plates increase surface area without replacing the main frame.

お客様の製品に関する懸念事項

A hydronic interface must transfer the design load with low approach temperature while keeping unlike water circuits isolated.

A shell-and-tube exchanger consumes excessive plantroom space.Thin corrugated plates concentrate a large transfer area inside a narrow frame.

One dirty circuit contaminates a clean secondary water loop.Independent gasketed channels maintain physical separation between the two fluids.

Future load expansion makes a fixed exchanger undersized.The frame can accept additional plates within its tightening-bolt capacity.

Deposits reduce performance but the transfer surface is inaccessible.Releasing the tie bolts exposes both sides of every removable plate for cleaning.

典型的な用途

Cleanroom chilled-water isolationHeat-recovery water loopsDistrict-cooling interface stationsProcess-water temperature controlBoiler and low-temperature hot-water separation

技術的なパラメータ

Representative construction data for a commercial HVAC gasketed plate exchanger are provided below.

コア材料	Corrugated AISI 304 or 316 stainless steel plate pack with elastomer gaskets
パネルの厚さ	0.4-0.7 mm heat-transfer plate thickness
有効幅	250-1200 mm plate and frame width
最大長さ	Up to 2400 mm frame depth along the plate-pack compression axis
鋼鉄の厚さを直面する	12-40 mm carbon-steel fixed and pressure plates
コア密度	Approximately 7900-8000 kg/m³ for stainless heat-transfer plates
熱伝導率	Approximately 14-16 W/(m·K) for austenitic stainless plate material
表面仕上げ	Pressed stainless plate surface with epoxy-painted carbon-steel frame
ジョイントタイプ	Gasketed alternating plate channels compressed by bolted tie rods with flanged ports
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

AISI 304, AISI 316 or titanium platesEPDM, NBR or high-temperature gasket materialsSingle-pass or multi-pass channel arrangementInsulation cover, drip tray and expandable plate count

Planning a Gasketed Plate-and-Frame Heat Exchanger specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する