English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
Foot-operated باب غرف الأبحاث التبديل
A low-mounted recessed toe switch that sends an opening request without requiring users to touch the door or wall controls with their hands.
- Hands Remain Free
- Recessed Toe Activation
- Stainless Cleanable Face
- Protected Sensor Module
مقدمة المنتج
The foot-operated cleanroom door switch places a recessed activation tunnel at the lower wall or door jamb. A user inserts a shoe toe into the protected zone, where an optical or low-force sensor operates a relay without an exposed floor pedal. The brushed stainless faceplate, sealed rear electronics box and clear status LED support frequent cleaning while keeping the activation point away from trolley impact paths.
الخصائص الرئيسية
A flush stainless faceplate avoids the projecting hinge and spring of a conventional floor pedal.
The protected optical cavity limits accidental triggering from nearby foot traffic.
A sealed rear module and removable terminal block simplify service from the wall cavity.
مخاوف المنتج للعملاء
A foot control must be accessible during material handling without becoming a projecting obstruction or a hard-to-clean floor fixture.
Operators carrying trays cannot reach a wall plate without shifting the load.The recessed toe switch provides a deliberate foot-operated request at the jamb.
Floor pedals trap residue around hinges and are vulnerable to trolley wheels.The mechanism mounts flush in the wall with no hardware on the walking surface.
A broad motion sensor opens the door for every person walking past.The protected recess requires a close, intentional toe insertion.
تطبيقات نموذجية
Material-handling cleanroom doorsGowning-room exitsClinical sterile corridorsFood-processing hygiene entrances
المعلمات الفنية
Representative dimensions and materials for a recessed stainless foot-operated cleanroom switch are listed below.
| المواد الأساسية | Optical activation sensor and FR-4 relay board in a sealed polymer rear enclosure |
|---|---|
| سمك اللوحة | Approximately 45–55 mm recessed installation depth |
| العرض الفعال | Approximately 100–120 mm stainless faceplate width |
| الحد الأقصى الطول | Approximately 160–200 mm faceplate height |
| الصلب يواجه سمك | 1.5–2.0 mm brushed 304 stainless-steel faceplate |
| الكثافة الأساسية | Approximately 1850 kg/m³ for the FR-4 control-board laminate |
| الموصلية الحرارية | Approximately 0.25–0.35 W/(m·K) for the FR-4 electronic core |
| إنهاء السطح | Brushed 304 stainless steel with dark blue or black recessed activation insert |
| نوع المشترك | Flush recessed wall box with sealed faceplate gasket and removable terminal connection |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Optical or low-force activationBlue status LEDDry-contact relay outputStainless wall-box and gasket kit
Planning a Foot-Operated Cleanroom Door Switch specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
