Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Switch de puerta de cuarto limpio operado por pies
A low-mounted recessed toe switch that sends an opening request without requiring users to touch the door or wall controls with their hands.
- Hands Remain Free
- Recessed Toe Activation
- Stainless Cleanable Face
- Protected Sensor Module
Introducción del producto
The foot-operated cleanroom door switch places a recessed activation tunnel at the lower wall or door jamb. A user inserts a shoe toe into the protected zone, where an optical or low-force sensor operates a relay without an exposed floor pedal. The brushed stainless faceplate, sealed rear electronics box and clear status LED support frequent cleaning while keeping the activation point away from trolley impact paths.
Características clave
A flush stainless faceplate avoids the projecting hinge and spring of a conventional floor pedal.
The protected optical cavity limits accidental triggering from nearby foot traffic.
A sealed rear module and removable terminal block simplify service from the wall cavity.
Preocupaciones del producto del cliente
A foot control must be accessible during material handling without becoming a projecting obstruction or a hard-to-clean floor fixture.
Operators carrying trays cannot reach a wall plate without shifting the load.The recessed toe switch provides a deliberate foot-operated request at the jamb.
Floor pedals trap residue around hinges and are vulnerable to trolley wheels.The mechanism mounts flush in the wall with no hardware on the walking surface.
A broad motion sensor opens the door for every person walking past.The protected recess requires a close, intentional toe insertion.
Aplicaciones típicas
Material-handling cleanroom doorsGowning-room exitsClinical sterile corridorsFood-processing hygiene entrances
Parámetros técnicos
Representative dimensions and materials for a recessed stainless foot-operated cleanroom switch are listed below.
| Materiales Core | Optical activation sensor and FR-4 relay board in a sealed polymer rear enclosure |
|---|---|
| Panel de espesor | Approximately 45–55 mm recessed installation depth |
| Ancho efectivo | Approximately 100–120 mm stainless faceplate width |
| Longitud máxima | Approximately 160–200 mm faceplate height |
| Acero frente a espesor | 1.5–2.0 mm brushed 304 stainless-steel faceplate |
| Densidad Core | Approximately 1850 kg/m³ for the FR-4 control-board laminate |
| Conductividad térmica | Approximately 0.25–0.35 W/(m·K) for the FR-4 electronic core |
| Superficie acabada | Brushed 304 stainless steel with dark blue or black recessed activation insert |
| Tipo conjunto | Flush recessed wall box with sealed faceplate gasket and removable terminal connection |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Optical or low-force activationBlue status LEDDry-contact relay outputStainless wall-box and gasket kit
Planning a Foot-Operated Cleanroom Door Switch specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
