Foot-operated cleanroom door switch with recessed toe sensor and controller

クリーンルームのドア、窓およびインターロックシステム

フット操作クリーンルームドアスイッチ

A low-mounted recessed toe switch that sends an opening request without requiring users to touch the door or wall controls with their hands.

Hands Remain Free
Recessed Toe Activation
Stainless Cleanable Face
Protected Sensor Module

見積もりリクエスト製品案内

商品紹介

The foot-operated cleanroom door switch places a recessed activation tunnel at the lower wall or door jamb. A user inserts a shoe toe into the protected zone, where an optical or low-force sensor operates a relay without an exposed floor pedal. The brushed stainless faceplate, sealed rear electronics box and clear status LED support frequent cleaning while keeping the activation point away from trolley impact paths.

主要な特徴

The recessed toe zone enables activation while both hands carry materials or remain gloved.

A flush stainless faceplate avoids the projecting hinge and spring of a conventional floor pedal.

The protected optical cavity limits accidental triggering from nearby foot traffic.

A sealed rear module and removable terminal block simplify service from the wall cavity.

お客様の製品に関する懸念事項

A foot control must be accessible during material handling without becoming a projecting obstruction or a hard-to-clean floor fixture.

Operators carrying trays cannot reach a wall plate without shifting the load.The recessed toe switch provides a deliberate foot-operated request at the jamb.

Floor pedals trap residue around hinges and are vulnerable to trolley wheels.The mechanism mounts flush in the wall with no hardware on the walking surface.

A broad motion sensor opens the door for every person walking past.The protected recess requires a close, intentional toe insertion.

典型的な用途

Material-handling cleanroom doorsGowning-room exitsClinical sterile corridorsFood-processing hygiene entrances

技術的なパラメータ

Representative dimensions and materials for a recessed stainless foot-operated cleanroom switch are listed below.

コア材料	Optical activation sensor and FR-4 relay board in a sealed polymer rear enclosure
パネルの厚さ	Approximately 45–55 mm recessed installation depth
有効幅	Approximately 100–120 mm stainless faceplate width
最大長さ	Approximately 160–200 mm faceplate height
鋼鉄の厚さを直面する	1.5–2.0 mm brushed 304 stainless-steel faceplate
コア密度	Approximately 1850 kg/m³ for the FR-4 control-board laminate
熱伝導率	Approximately 0.25–0.35 W/(m·K) for the FR-4 electronic core
表面仕上げ	Brushed 304 stainless steel with dark blue or black recessed activation insert
ジョイントタイプ	Flush recessed wall box with sealed faceplate gasket and removable terminal connection
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Optical or low-force activationBlue status LEDDry-contact relay outputStainless wall-box and gasket kit

Planning a Foot-Operated Cleanroom Door Switch specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する