Foot-operated cleanroom door switch with recessed toe sensor and controller

클린룸 도어, 창문 및 인터락 시스템

발로 작동하는 클린룸 도어 스위치

A low-mounted recessed toe switch that sends an opening request without requiring users to touch the door or wall controls with their hands.

Hands Remain Free
Recessed Toe Activation
Stainless Cleanable Face
Protected Sensor Module

견적 요청 제품 찾아보기

상품 소개

The foot-operated cleanroom door switch places a recessed activation tunnel at the lower wall or door jamb. A user inserts a shoe toe into the protected zone, where an optical or low-force sensor operates a relay without an exposed floor pedal. The brushed stainless faceplate, sealed rear electronics box and clear status LED support frequent cleaning while keeping the activation point away from trolley impact paths.

주요 기능

The recessed toe zone enables activation while both hands carry materials or remain gloved.

A flush stainless faceplate avoids the projecting hinge and spring of a conventional floor pedal.

The protected optical cavity limits accidental triggering from nearby foot traffic.

A sealed rear module and removable terminal block simplify service from the wall cavity.

고객 제품 관심사

A foot control must be accessible during material handling without becoming a projecting obstruction or a hard-to-clean floor fixture.

Operators carrying trays cannot reach a wall plate without shifting the load.The recessed toe switch provides a deliberate foot-operated request at the jamb.

Floor pedals trap residue around hinges and are vulnerable to trolley wheels.The mechanism mounts flush in the wall with no hardware on the walking surface.

A broad motion sensor opens the door for every person walking past.The protected recess requires a close, intentional toe insertion.

일반적인 응용 프로그램

Material-handling cleanroom doorsGowning-room exitsClinical sterile corridorsFood-processing hygiene entrances

기술 매개변수

Representative dimensions and materials for a recessed stainless foot-operated cleanroom switch are listed below.

핵심 재료	Optical activation sensor and FR-4 relay board in a sealed polymer rear enclosure
패널 두께	Approximately 45–55 mm recessed installation depth
유효 폭	Approximately 100–120 mm stainless faceplate width
최대 길이	Approximately 160–200 mm faceplate height
강철 면면 두께	1.5–2.0 mm brushed 304 stainless-steel faceplate
코어 밀도	Approximately 1850 kg/m³ for the FR-4 control-board laminate
열전도도 (Thermal Conductivity)	Approximately 0.25–0.35 W/(m·K) for the FR-4 electronic core
표면 마무리	Brushed 304 stainless steel with dark blue or black recessed activation insert
접합 유형	Flush recessed wall box with sealed faceplate gasket and removable terminal connection
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Optical or low-force activationBlue status LEDDry-contact relay outputStainless wall-box and gasket kit

Planning a Foot-Operated Cleanroom Door Switch specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.