Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraumtüren, Fenster und Interlock-Systeme
Fußbedienung Reinraum Tür Schalter
A low-mounted recessed toe switch that sends an opening request without requiring users to touch the door or wall controls with their hands.
- Hands Remain Free
- Recessed Toe Activation
- Stainless Cleanable Face
- Protected Sensor Module
Produkteinführung
The foot-operated cleanroom door switch places a recessed activation tunnel at the lower wall or door jamb. A user inserts a shoe toe into the protected zone, where an optical or low-force sensor operates a relay without an exposed floor pedal. The brushed stainless faceplate, sealed rear electronics box and clear status LED support frequent cleaning while keeping the activation point away from trolley impact paths.
Key Features
A flush stainless faceplate avoids the projecting hinge and spring of a conventional floor pedal.
The protected optical cavity limits accidental triggering from nearby foot traffic.
A sealed rear module and removable terminal block simplify service from the wall cavity.
Kunden Produktbedenken
A foot control must be accessible during material handling without becoming a projecting obstruction or a hard-to-clean floor fixture.
Operators carrying trays cannot reach a wall plate without shifting the load.The recessed toe switch provides a deliberate foot-operated request at the jamb.
Floor pedals trap residue around hinges and are vulnerable to trolley wheels.The mechanism mounts flush in the wall with no hardware on the walking surface.
A broad motion sensor opens the door for every person walking past.The protected recess requires a close, intentional toe insertion.
Typische Anwendungen
Material-handling cleanroom doorsGowning-room exitsClinical sterile corridorsFood-processing hygiene entrances
Technische Parameter
Representative dimensions and materials for a recessed stainless foot-operated cleanroom switch are listed below.
| Core Material | Optical activation sensor and FR-4 relay board in a sealed polymer rear enclosure |
|---|---|
| Panel Dicke | Approximately 45–55 mm recessed installation depth |
| Effektive Breite | Approximately 100–120 mm stainless faceplate width |
| Maximale Länge | Approximately 160–200 mm faceplate height |
| Stahl facing Dicke | 1.5–2.0 mm brushed 304 stainless-steel faceplate |
| Kerndichte | Approximately 1850 kg/m³ for the FR-4 control-board laminate |
| Thermische Leitfähigkeit | Approximately 0.25–0.35 W/(m·K) for the FR-4 electronic core |
| Oberfläche Finish | Brushed 304 stainless steel with dark blue or black recessed activation insert |
| Gemeinsamer Typ | Flush recessed wall box with sealed faceplate gasket and removable terminal connection |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Optical or low-force activationBlue status LEDDry-contact relay outputStainless wall-box and gasket kit
Planning a Foot-Operated Cleanroom Door Switch specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
