İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri
Ayakla Çalışan Temiz Oda Kapı Anahtarı
A low-mounted recessed toe switch that sends an opening request without requiring users to touch the door or wall controls with their hands.
- Hands Remain Free
- Recessed Toe Activation
- Stainless Cleanable Face
- Protected Sensor Module
Ürün tanıtımı
The foot-operated cleanroom door switch places a recessed activation tunnel at the lower wall or door jamb. A user inserts a shoe toe into the protected zone, where an optical or low-force sensor operates a relay without an exposed floor pedal. The brushed stainless faceplate, sealed rear electronics box and clear status LED support frequent cleaning while keeping the activation point away from trolley impact paths.
Ana Özellikler
A flush stainless faceplate avoids the projecting hinge and spring of a conventional floor pedal.
The protected optical cavity limits accidental triggering from nearby foot traffic.
A sealed rear module and removable terminal block simplify service from the wall cavity.
Müşteri Ürün Sorunları
A foot control must be accessible during material handling without becoming a projecting obstruction or a hard-to-clean floor fixture.
Operators carrying trays cannot reach a wall plate without shifting the load.The recessed toe switch provides a deliberate foot-operated request at the jamb.
Floor pedals trap residue around hinges and are vulnerable to trolley wheels.The mechanism mounts flush in the wall with no hardware on the walking surface.
A broad motion sensor opens the door for every person walking past.The protected recess requires a close, intentional toe insertion.
Tipik uygulamalar
Material-handling cleanroom doorsGowning-room exitsClinical sterile corridorsFood-processing hygiene entrances
Teknik parametreler
Representative dimensions and materials for a recessed stainless foot-operated cleanroom switch are listed below.
| Temel malzemeler | Optical activation sensor and FR-4 relay board in a sealed polymer rear enclosure |
|---|---|
| Panel kalınlığı | Approximately 45–55 mm recessed installation depth |
| Effective Width (Etkili Genişlik) | Approximately 100–120 mm stainless faceplate width |
| Maksimum uzunluk | Approximately 160–200 mm faceplate height |
| Çelik yüz yüze kalınlığı | 1.5–2.0 mm brushed 304 stainless-steel faceplate |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1850 kg/m³ for the FR-4 control-board laminate |
| Termal İletkenlik | Approximately 0.25–0.35 W/(m·K) for the FR-4 electronic core |
| Yüzey bitirme | Brushed 304 stainless steel with dark blue or black recessed activation insert |
| Ortak tip | Flush recessed wall box with sealed faceplate gasket and removable terminal connection |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Optical or low-force activationBlue status LEDDry-contact relay outputStainless wall-box and gasket kit
Planning a Foot-Operated Cleanroom Door Switch specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
