English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ESD والمنتجات المضادة للساكنة
ESD نظام التأريض للأحذية نظام حماية اليد
The ESD Footwear Grounding System uses a matched pair of adjustable heel grounders and conductive ribbons to connect personnel to a compatible ESD floor.
- Dual-foot configuration maintains contact as the operator walks.
- Conductive ribbon links the wearer to the floor through the shoe.
- Adjustable reusable cups suit common closed work footwear.
مقدمة المنتج
Each unit combines a non-marking rubber heel cup, adjustable retention strap and bright conductive ribbon placed inside the shoe beneath the wearer. Used on both feet, the system preserves a grounding path when one foot lifts during walking. A tester verifies the complete person-footwear-floor path before entry.
الخصائص الرئيسية
Black conductive rubber sole contacts the ESD floor.
High-visibility ribbon helps supervisors confirm correct fitting.
Adjustable strap retains the cup around different shoe profiles.
Snap-connected components permit inspection and replacement.
Compact design works with ordinary enclosed work shoes.
مخاوف المنتج للعملاء
Reliable footwear grounding depends on two-foot use, ribbon contact with the wearer, secure fit and a compatible, verified ESD floor.
Ground is interrupted whenever one foot leaves the floor.A grounder on each foot maintains a second contact during normal walking.
A loose cup slips off the heel.Adjustable ankle retention holds the molded cup against the shoe.
The ribbon is incorrectly left outside the shoe.Bright yellow material makes routing easy to see during entry checks.
Dark rubber marks clean flooring.Non-marking dissipative outer layers are available for light surfaces.
Visual inspection cannot prove electrical continuity.The complete worn system can be checked on a footwear or personnel tester.
تطبيقات نموذجية
Electronics production and repair areas.Semiconductor assembly corridors.ESD-protected warehouses.Component inspection and packing rooms.Visitor grounding at controlled-area entrances.
المعلمات الفنية
The specifications represent a reusable dual-cup heel-grounder set; strap length, resistor arrangement and sole construction can be selected for the site program.
| المواد الأساسية | Conductive and static-dissipative rubber with polyester conductive ribbon |
|---|---|
| سمك اللوحة | 1.5–3.0 mm rubber sole thickness |
| العرض الفعال | 35–70 mm heel-contact width |
| الحد الأقصى الطول | Up to 760 mm conductive ribbon length |
| الصلب يواجه سمك | 0.5 mm nominal stainless snap shell thickness |
| الكثافة الأساسية | 1050–1250 kg/m³ rubber compound density |
| الموصلية الحرارية | 0.13–0.20 W/(m·K) |
| إنهاء السطح | Black non-marking molded rubber, black strap and yellow conductive ribbon |
| نوع المشترك | Adjustable heel cup with snap-connected ribbon and hook-and-loop strap |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single-cup or dual-cup profiles.One-megohm, two-megohm or resistor-free configurations.Yellow, blue or black straps.Hook-and-loop, buckle or quick-release closure.Disposable visitor grounding strips.Compatible entrance tester and test plate.
Planning a ESD Footwear Grounding System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
