Complete dual ESD footwear grounding kit with heel cups cords and test plate

ESD および帯電防止製品

ESD 靴の接地システム

The ESD Footwear Grounding System uses a matched pair of adjustable heel grounders and conductive ribbons to connect personnel to a compatible ESD floor.

Dual-foot configuration maintains contact as the operator walks.
Conductive ribbon links the wearer to the floor through the shoe.
Adjustable reusable cups suit common closed work footwear.

見積もりリクエスト製品案内

商品紹介

Each unit combines a non-marking rubber heel cup, adjustable retention strap and bright conductive ribbon placed inside the shoe beneath the wearer. Used on both feet, the system preserves a grounding path when one foot lifts during walking. A tester verifies the complete person-footwear-floor path before entry.

主要な特徴

Pair configuration supports continuous walking contact.

Black conductive rubber sole contacts the ESD floor.

High-visibility ribbon helps supervisors confirm correct fitting.

Adjustable strap retains the cup around different shoe profiles.

Snap-connected components permit inspection and replacement.

Compact design works with ordinary enclosed work shoes.

お客様の製品に関する懸念事項

Reliable footwear grounding depends on two-foot use, ribbon contact with the wearer, secure fit and a compatible, verified ESD floor.

Ground is interrupted whenever one foot leaves the floor.A grounder on each foot maintains a second contact during normal walking.

A loose cup slips off the heel.Adjustable ankle retention holds the molded cup against the shoe.

The ribbon is incorrectly left outside the shoe.Bright yellow material makes routing easy to see during entry checks.

Dark rubber marks clean flooring.Non-marking dissipative outer layers are available for light surfaces.

Visual inspection cannot prove electrical continuity.The complete worn system can be checked on a footwear or personnel tester.

典型的な用途

Electronics production and repair areas.Semiconductor assembly corridors.ESD-protected warehouses.Component inspection and packing rooms.Visitor grounding at controlled-area entrances.

技術的なパラメータ

The specifications represent a reusable dual-cup heel-grounder set; strap length, resistor arrangement and sole construction can be selected for the site program.

コア材料	Conductive and static-dissipative rubber with polyester conductive ribbon
パネルの厚さ	1.5–3.0 mm rubber sole thickness
有効幅	35–70 mm heel-contact width
最大長さ	Up to 760 mm conductive ribbon length
鋼鉄の厚さを直面する	0.5 mm nominal stainless snap shell thickness
コア密度	1050–1250 kg/m³ rubber compound density
熱伝導率	0.13–0.20 W/(m·K)
表面仕上げ	Black non-marking molded rubber, black strap and yellow conductive ribbon
ジョイントタイプ	Adjustable heel cup with snap-connected ribbon and hook-and-loop strap
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single-cup or dual-cup profiles.One-megohm, two-megohm or resistor-free configurations.Yellow, blue or black straps.Hook-and-loop, buckle or quick-release closure.Disposable visitor grounding strips.Compatible entrance tester and test plate.

Planning a ESD Footwear Grounding System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する