English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
ESD и антистатические продукты
Система заземления обуви ESD
The ESD Footwear Grounding System uses a matched pair of adjustable heel grounders and conductive ribbons to connect personnel to a compatible ESD floor.
- Dual-foot configuration maintains contact as the operator walks.
- Conductive ribbon links the wearer to the floor through the shoe.
- Adjustable reusable cups suit common closed work footwear.
Введение продукции
Each unit combines a non-marking rubber heel cup, adjustable retention strap and bright conductive ribbon placed inside the shoe beneath the wearer. Used on both feet, the system preserves a grounding path when one foot lifts during walking. A tester verifies the complete person-footwear-floor path before entry.
Основные характеристики
Black conductive rubber sole contacts the ESD floor.
High-visibility ribbon helps supervisors confirm correct fitting.
Adjustable strap retains the cup around different shoe profiles.
Snap-connected components permit inspection and replacement.
Compact design works with ordinary enclosed work shoes.
Обеспокоенность клиентов продуктами
Reliable footwear grounding depends on two-foot use, ribbon contact with the wearer, secure fit and a compatible, verified ESD floor.
Ground is interrupted whenever one foot leaves the floor.A grounder on each foot maintains a second contact during normal walking.
A loose cup slips off the heel.Adjustable ankle retention holds the molded cup against the shoe.
The ribbon is incorrectly left outside the shoe.Bright yellow material makes routing easy to see during entry checks.
Dark rubber marks clean flooring.Non-marking dissipative outer layers are available for light surfaces.
Visual inspection cannot prove electrical continuity.The complete worn system can be checked on a footwear or personnel tester.
Типичные приложения
Electronics production and repair areas.Semiconductor assembly corridors.ESD-protected warehouses.Component inspection and packing rooms.Visitor grounding at controlled-area entrances.
Технические параметры
The specifications represent a reusable dual-cup heel-grounder set; strap length, resistor arrangement and sole construction can be selected for the site program.
| Основной материал | Conductive and static-dissipative rubber with polyester conductive ribbon |
|---|---|
| Толщина панели | 1.5–3.0 mm rubber sole thickness |
| эффективная ширина | 35–70 mm heel-contact width |
| Максимальная длина | Up to 760 mm conductive ribbon length |
| Толщина линий стали | 0.5 mm nominal stainless snap shell thickness |
| Плотность ядра | 1050–1250 kg/m³ rubber compound density |
| Теплопроводимость | 0.13–0.20 W/(m·K) |
| Поверхностная отделка | Black non-marking molded rubber, black strap and yellow conductive ribbon |
| Объединенный тип | Adjustable heel cup with snap-connected ribbon and hook-and-loop strap |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Single-cup or dual-cup profiles.One-megohm, two-megohm or resistor-free configurations.Yellow, blue or black straps.Hook-and-loop, buckle or quick-release closure.Disposable visitor grounding strips.Compatible entrance tester and test plate.
Planning a ESD Footwear Grounding System specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
