Complete dual ESD footwear grounding kit with heel cups cords and test plate

ESD 및 정전기 방지 제품

ESD 신발 접지 시스템

The ESD Footwear Grounding System uses a matched pair of adjustable heel grounders and conductive ribbons to connect personnel to a compatible ESD floor.

Dual-foot configuration maintains contact as the operator walks.
Conductive ribbon links the wearer to the floor through the shoe.
Adjustable reusable cups suit common closed work footwear.

견적 요청 제품 찾아보기

상품 소개

Each unit combines a non-marking rubber heel cup, adjustable retention strap and bright conductive ribbon placed inside the shoe beneath the wearer. Used on both feet, the system preserves a grounding path when one foot lifts during walking. A tester verifies the complete person-footwear-floor path before entry.

주요 기능

Pair configuration supports continuous walking contact.

Black conductive rubber sole contacts the ESD floor.

High-visibility ribbon helps supervisors confirm correct fitting.

Adjustable strap retains the cup around different shoe profiles.

Snap-connected components permit inspection and replacement.

Compact design works with ordinary enclosed work shoes.

고객 제품 관심사

Reliable footwear grounding depends on two-foot use, ribbon contact with the wearer, secure fit and a compatible, verified ESD floor.

Ground is interrupted whenever one foot leaves the floor.A grounder on each foot maintains a second contact during normal walking.

A loose cup slips off the heel.Adjustable ankle retention holds the molded cup against the shoe.

The ribbon is incorrectly left outside the shoe.Bright yellow material makes routing easy to see during entry checks.

Dark rubber marks clean flooring.Non-marking dissipative outer layers are available for light surfaces.

Visual inspection cannot prove electrical continuity.The complete worn system can be checked on a footwear or personnel tester.

일반적인 응용 프로그램

Electronics production and repair areas.Semiconductor assembly corridors.ESD-protected warehouses.Component inspection and packing rooms.Visitor grounding at controlled-area entrances.

기술 매개변수

The specifications represent a reusable dual-cup heel-grounder set; strap length, resistor arrangement and sole construction can be selected for the site program.

핵심 재료	Conductive and static-dissipative rubber with polyester conductive ribbon
패널 두께	1.5–3.0 mm rubber sole thickness
유효 폭	35–70 mm heel-contact width
최대 길이	최대 760 mm 전도성 리본 길이
강철 면면 두께	0.5 mm 공칭 스테인레스 스냅 쉘 두께
코어 밀도	1050 - 1250 kg / m 3 고무 화합물 밀도
열전도도 (Thermal Conductivity)	0. 13 - 0. 20 W / (m · K)
표면 마무리	Black non-marking molded rubber, black strap and yellow conductive ribbon
접합 유형	Adjustable heel cup with snap-connected ribbon and hook-and-loop strap
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single-cup or dual-cup profiles.One-megohm, two-megohm or resistor-free configurations.Yellow, blue or black straps.후크 앤 루프, 버클 또는 빠른 릴리프 닫기.Disposable visitor grounding strips.Compatible entrance tester and test plate.

Planning a ESD Footwear Grounding System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.