Complete dual ESD footwear grounding kit with heel cups cords and test plate

ESD ve Antistatik Ürünler

ESD Ayakkabı Topraklama Sistemi

The ESD Footwear Grounding System uses a matched pair of adjustable heel grounders and conductive ribbons to connect personnel to a compatible ESD floor.

Dual-foot configuration maintains contact as the operator walks.
Conductive ribbon links the wearer to the floor through the shoe.
Adjustable reusable cups suit common closed work footwear.

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Each unit combines a non-marking rubber heel cup, adjustable retention strap and bright conductive ribbon placed inside the shoe beneath the wearer. Used on both feet, the system preserves a grounding path when one foot lifts during walking. A tester verifies the complete person-footwear-floor path before entry.

Ana Özellikler

Pair configuration supports continuous walking contact.

Black conductive rubber sole contacts the ESD floor.

High-visibility ribbon helps supervisors confirm correct fitting.

Adjustable strap retains the cup around different shoe profiles.

Snap-connected components permit inspection and replacement.

Compact design works with ordinary enclosed work shoes.

Müşteri Ürün Sorunları

Reliable footwear grounding depends on two-foot use, ribbon contact with the wearer, secure fit and a compatible, verified ESD floor.

Ground is interrupted whenever one foot leaves the floor.A grounder on each foot maintains a second contact during normal walking.

A loose cup slips off the heel.Adjustable ankle retention holds the molded cup against the shoe.

The ribbon is incorrectly left outside the shoe.Bright yellow material makes routing easy to see during entry checks.

Dark rubber marks clean flooring.Non-marking dissipative outer layers are available for light surfaces.

Visual inspection cannot prove electrical continuity.The complete worn system can be checked on a footwear or personnel tester.

Tipik uygulamalar

Electronics production and repair areas.Semiconductor assembly corridors.ESD-protected warehouses.Component inspection and packing rooms.Visitor grounding at controlled-area entrances.

Teknik parametreler

The specifications represent a reusable dual-cup heel-grounder set; strap length, resistor arrangement and sole construction can be selected for the site program.

Temel malzemeler	Conductive and static-dissipative rubber with polyester conductive ribbon
Panel kalınlığı	1.5–3.0 mm rubber sole thickness
Effective Width (Etkili Genişlik)	35–70 mm heel-contact width
Maksimum uzunluk	Up to 760 mm conductive ribbon length
Çelik yüz yüze kalınlığı	0.5 mm nominal stainless snap shell thickness
Core Density (Çekirdek Yoğunluğu)	1050–1250 kg/m³ rubber compound density
Termal İletkenlik	0.13–0.20 W/(m·K)
Yüzey bitirme	Black non-marking molded rubber, black strap and yellow conductive ribbon
Ortak tip	Adjustable heel cup with snap-connected ribbon and hook-and-loop strap
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Single-cup or dual-cup profiles.One-megohm, two-megohm or resistor-free configurations.Yellow, blue or black straps.Hook-and-loop, buckle or quick-release closure.Disposable visitor grounding strips.Compatible entrance tester and test plate.

Planning a ESD Footwear Grounding System specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun