English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات تهوية وتكييف ومعالجة الهواء في الغرف النظيفة
القطب البخار المرطب
A packaged atmospheric steam generator that uses water conductivity between immersed electrodes to supply hygienic steam to a duct lance or room blower.
- Conductivity-Based Steam Generation
- Replaceable Cylinder
- Adaptive Fill and Drain
- Duct or Room Dispersion
مقدمة المنتج
Mains water enters a replaceable steam cylinder containing large-area electrodes. Electrical current passes through the water and generates steam directly, while automatic fill and drain cycles regulate conductivity and output. The cabinet contains the cylinder, fill cup, drain pump and touchscreen controls, and connects to either a duct steam distributor or a direct-room blower pack.
الخصائص الرئيسية
A replaceable cylinder packages electrodes and accumulated mineral deposits into one service component.
Adaptive fill and blowdown respond to incoming water conductivity and operating current.
Touch controls provide proportional demand input, operating history and common building-control connections.
مخاوف المنتج للعملاء
Electrode humidifiers depend on water conductivity and mineral management to deliver stable steam with predictable maintenance.
Feed-water conductivity changes and causes unstable current draw.Automatic fill and drain logic adapts cylinder water concentration to the measured electrical load.
Minerals accumulate on electrodes and reduce usable output.The complete electrode cylinder is removable and replaceable without dismantling the cabinet.
Condensate in the steam hose causes spitting at the distributor.Correct hose slope and a dedicated condensate return keep liquid out of the dispersion lance.
Humidity demand varies quickly with outdoor-air load.Proportional input modulates steam output across the usable cylinder range.
تطبيقات نموذجية
Pharmaceutical cleanroom humidificationData-center humidity controlHospital and laboratory air handlersElectronics manufacturing roomsMuseums and controlled storage
المعلمات الفنية
Representative physical and operating ranges for a commercial electrode humidifier are listed below.
| المواد الأساسية | Replaceable polymer steam cylinder with corrosion-resistant grid electrodes |
|---|---|
| سمك اللوحة | 1.0-1.5 mm powder-coated steel cabinet panel thickness |
| العرض الفعال | 350-1000 mm cabinet width depending on cylinder count |
| الحد الأقصى الطول | Up to 400 mm cabinet depth depending on cylinder count |
| الصلب يواجه سمك | 1.0-1.5 mm coated steel enclosure |
| الكثافة الأساسية | Approximately 900-910 kg/m³ for polypropylene steam-cylinder material |
| الموصلية الحرارية | Approximately 0.19-0.25 W/(m·K) for polymer cylinder material |
| إنهاء السطح | Off-white powder-coated cabinet with blue polymer service components |
| نوع المشترك | Wall-mounted bolted cabinet with replaceable cylinder, hose steam outlet and threaded water connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single or dual steam cylinderDuct dispersion lance or direct-room blower packOutdoor weather-resistant enclosureHumidity sensors and common BMS protocols
Planning a Electrode Steam Humidifier specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
