Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de HVAC y manejo de aire para salas limpias
Humidificador de vapor de electrodo por
A packaged atmospheric steam generator that uses water conductivity between immersed electrodes to supply hygienic steam to a duct lance or room blower.
- Conductivity-Based Steam Generation
- Replaceable Cylinder
- Adaptive Fill and Drain
- Duct or Room Dispersion
Introducción del producto
Mains water enters a replaceable steam cylinder containing large-area electrodes. Electrical current passes through the water and generates steam directly, while automatic fill and drain cycles regulate conductivity and output. The cabinet contains the cylinder, fill cup, drain pump and touchscreen controls, and connects to either a duct steam distributor or a direct-room blower pack.
Características clave
A replaceable cylinder packages electrodes and accumulated mineral deposits into one service component.
Adaptive fill and blowdown respond to incoming water conductivity and operating current.
Touch controls provide proportional demand input, operating history and common building-control connections.
Preocupaciones del producto del cliente
Electrode humidifiers depend on water conductivity and mineral management to deliver stable steam with predictable maintenance.
Feed-water conductivity changes and causes unstable current draw.Automatic fill and drain logic adapts cylinder water concentration to the measured electrical load.
Minerals accumulate on electrodes and reduce usable output.The complete electrode cylinder is removable and replaceable without dismantling the cabinet.
Condensate in the steam hose causes spitting at the distributor.Correct hose slope and a dedicated condensate return keep liquid out of the dispersion lance.
Humidity demand varies quickly with outdoor-air load.Proportional input modulates steam output across the usable cylinder range.
Aplicaciones típicas
Pharmaceutical cleanroom humidificationData-center humidity controlHospital and laboratory air handlersElectronics manufacturing roomsMuseums and controlled storage
Parámetros técnicos
Representative physical and operating ranges for a commercial electrode humidifier are listed below.
| Materiales Core | Replaceable polymer steam cylinder with corrosion-resistant grid electrodes |
|---|---|
| Panel de espesor | 1.0-1.5 mm powder-coated steel cabinet panel thickness |
| Ancho efectivo | 350-1000 mm cabinet width depending on cylinder count |
| Longitud máxima | Up to 400 mm cabinet depth depending on cylinder count |
| Acero frente a espesor | 1.0-1.5 mm coated steel enclosure |
| Densidad Core | Approximately 900-910 kg/m³ for polypropylene steam-cylinder material |
| Conductividad térmica | Approximately 0.19-0.25 W/(m·K) for polymer cylinder material |
| Superficie acabada | Off-white powder-coated cabinet with blue polymer service components |
| Tipo conjunto | Wall-mounted bolted cabinet with replaceable cylinder, hose steam outlet and threaded water connections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single or dual steam cylinderDuct dispersion lance or direct-room blower packOutdoor weather-resistant enclosureHumidity sensors and common BMS protocols
Planning a Electrode Steam Humidifier specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
