Electrode steam humidifier with blue replaceable cylinder visible

Temiz Oda HVAC ve Hava İşleme Ekipmanları

Elektrot Buhar Nemlendiricisi

A packaged atmospheric steam generator that uses water conductivity between immersed electrodes to supply hygienic steam to a duct lance or room blower.

Conductivity-Based Steam Generation
Replaceable Cylinder
Adaptive Fill and Drain
Duct or Room Dispersion

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Mains water enters a replaceable steam cylinder containing large-area electrodes. Electrical current passes through the water and generates steam directly, while automatic fill and drain cycles regulate conductivity and output. The cabinet contains the cylinder, fill cup, drain pump and touchscreen controls, and connects to either a duct steam distributor or a direct-room blower pack.

Ana Özellikler

The water itself forms the resistive path, eliminating a separate immersed heater bundle.

A replaceable cylinder packages electrodes and accumulated mineral deposits into one service component.

Adaptive fill and blowdown respond to incoming water conductivity and operating current.

Touch controls provide proportional demand input, operating history and common building-control connections.

Müşteri Ürün Sorunları

Electrode humidifiers depend on water conductivity and mineral management to deliver stable steam with predictable maintenance.

Feed-water conductivity changes and causes unstable current draw.Automatic fill and drain logic adapts cylinder water concentration to the measured electrical load.

Minerals accumulate on electrodes and reduce usable output.The complete electrode cylinder is removable and replaceable without dismantling the cabinet.

Condensate in the steam hose causes spitting at the distributor.Correct hose slope and a dedicated condensate return keep liquid out of the dispersion lance.

Humidity demand varies quickly with outdoor-air load.Proportional input modulates steam output across the usable cylinder range.

Tipik uygulamalar

Pharmaceutical cleanroom humidificationData-center humidity controlHospital and laboratory air handlersElectronics manufacturing roomsMuseums and controlled storage

Teknik parametreler

Representative physical and operating ranges for a commercial electrode humidifier are listed below.

Temel malzemeler	Replaceable polymer steam cylinder with corrosion-resistant grid electrodes
Panel kalınlığı	1.0-1.5 mm powder-coated steel cabinet panel thickness
Effective Width (Etkili Genişlik)	350-1000 mm cabinet width depending on cylinder count
Maksimum uzunluk	Up to 400 mm cabinet depth depending on cylinder count
Çelik yüz yüze kalınlığı	1.0-1.5 mm coated steel enclosure
Core Density (Çekirdek Yoğunluğu)	Approximately 900-910 kg/m³ for polypropylene steam-cylinder material
Termal İletkenlik	Approximately 0.19-0.25 W/(m·K) for polymer cylinder material
Yüzey bitirme	Off-white powder-coated cabinet with blue polymer service components
Ortak tip	Wall-mounted bolted cabinet with replaceable cylinder, hose steam outlet and threaded water connections
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Single or dual steam cylinderDuct dispersion lance or direct-room blower packOutdoor weather-resistant enclosureHumidity sensors and common BMS protocols

Planning a Electrode Steam Humidifier specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun