Electrode steam humidifier with blue replaceable cylinder visible

ОВК и оборудование для обработки воздуха в чистых помещениях

Электродный паровый увлажнитель

A packaged atmospheric steam generator that uses water conductivity between immersed electrodes to supply hygienic steam to a duct lance or room blower.

Conductivity-Based Steam Generation
Replaceable Cylinder
Adaptive Fill and Drain
Duct or Room Dispersion

Запрос котировки Просмотреть продукты

Введение продукции

Mains water enters a replaceable steam cylinder containing large-area electrodes. Electrical current passes through the water and generates steam directly, while automatic fill and drain cycles regulate conductivity and output. The cabinet contains the cylinder, fill cup, drain pump and touchscreen controls, and connects to either a duct steam distributor or a direct-room blower pack.

Основные характеристики

The water itself forms the resistive path, eliminating a separate immersed heater bundle.

A replaceable cylinder packages electrodes and accumulated mineral deposits into one service component.

Adaptive fill and blowdown respond to incoming water conductivity and operating current.

Touch controls provide proportional demand input, operating history and common building-control connections.

Обеспокоенность клиентов продуктами

Electrode humidifiers depend on water conductivity and mineral management to deliver stable steam with predictable maintenance.

Feed-water conductivity changes and causes unstable current draw.Automatic fill and drain logic adapts cylinder water concentration to the measured electrical load.

Minerals accumulate on electrodes and reduce usable output.The complete electrode cylinder is removable and replaceable without dismantling the cabinet.

Condensate in the steam hose causes spitting at the distributor.Correct hose slope and a dedicated condensate return keep liquid out of the dispersion lance.

Humidity demand varies quickly with outdoor-air load.Proportional input modulates steam output across the usable cylinder range.

Типичные приложения

Pharmaceutical cleanroom humidificationData-center humidity controlHospital and laboratory air handlersElectronics manufacturing roomsMuseums and controlled storage

Технические параметры

Representative physical and operating ranges for a commercial electrode humidifier are listed below.

Основной материал	Replaceable polymer steam cylinder with corrosion-resistant grid electrodes
Толщина панели	1.0-1.5 mm powder-coated steel cabinet panel thickness
эффективная ширина	350-1000 mm cabinet width depending on cylinder count
Максимальная длина	Up to 400 mm cabinet depth depending on cylinder count
Толщина линий стали	1.0-1.5 mm coated steel enclosure
Плотность ядра	Approximately 900-910 kg/m³ for polypropylene steam-cylinder material
Теплопроводимость	Approximately 0.19-0.25 W/(m·K) for polymer cylinder material
Поверхностная отделка	Off-white powder-coated cabinet with blue polymer service components
Объединенный тип	Wall-mounted bolted cabinet with replaceable cylinder, hose steam outlet and threaded water connections
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Single or dual steam cylinderDuct dispersion lance or direct-room blower packOutdoor weather-resistant enclosureHumidity sensors and common BMS protocols

Planning a Electrode Steam Humidifier specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой