Electrode steam humidifier with blue replaceable cylinder visible

Salle blanche HVAC et équipement de manutention de l'air

Humidificateur à vapeur à électrode

A packaged atmospheric steam generator that uses water conductivity between immersed electrodes to supply hygienic steam to a duct lance or room blower.

Conductivity-Based Steam Generation
Replaceable Cylinder
Adaptive Fill and Drain
Duct or Room Dispersion

Demander un devis. Browse les produits

Introduction de produit

Mains water enters a replaceable steam cylinder containing large-area electrodes. Electrical current passes through the water and generates steam directly, while automatic fill and drain cycles regulate conductivity and output. The cabinet contains the cylinder, fill cup, drain pump and touchscreen controls, and connects to either a duct steam distributor or a direct-room blower pack.

Key Features

The water itself forms the resistive path, eliminating a separate immersed heater bundle.

A replaceable cylinder packages electrodes and accumulated mineral deposits into one service component.

Adaptive fill and blowdown respond to incoming water conductivity and operating current.

Touch controls provide proportional demand input, operating history and common building-control connections.

Préoccupations du client produit

Electrode humidifiers depend on water conductivity and mineral management to deliver stable steam with predictable maintenance.

Feed-water conductivity changes and causes unstable current draw.Automatic fill and drain logic adapts cylinder water concentration to the measured electrical load.

Minerals accumulate on electrodes and reduce usable output.The complete electrode cylinder is removable and replaceable without dismantling the cabinet.

Condensate in the steam hose causes spitting at the distributor.Correct hose slope and a dedicated condensate return keep liquid out of the dispersion lance.

Humidity demand varies quickly with outdoor-air load.Proportional input modulates steam output across the usable cylinder range.

Les applications typiques

Pharmaceutical cleanroom humidificationData-center humidity controlHospital and laboratory air handlersElectronics manufacturing roomsMuseums and controlled storage

Paramètres techniques

Representative physical and operating ranges for a commercial electrode humidifier are listed below.

Matériaux de base	Replaceable polymer steam cylinder with corrosion-resistant grid electrodes
Panneau épaisseur	1.0-1.5 mm powder-coated steel cabinet panel thickness
Largeur effective	350-1000 mm cabinet width depending on cylinder count
Longueur maximale	Up to 400 mm cabinet depth depending on cylinder count
Acier face épaisseur	1.0-1.5 mm coated steel enclosure
Densité Core	Approximately 900-910 kg/m³ for polypropylene steam-cylinder material
Conductivité thermique	Approximately 0.19-0.25 W/(m·K) for polymer cylinder material
surface finie	Off-white powder-coated cabinet with blue polymer service components
Type joint	Wall-mounted bolted cabinet with replaceable cylinder, hose steam outlet and threaded water connections
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Single or dual steam cylinderDuct dispersion lance or direct-room blower packOutdoor weather-resistant enclosureHumidity sensors and common BMS protocols

Planning a Electrode Steam Humidifier specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe