Electrode steam humidifier with blue replaceable cylinder visible

クリーンルーム HVAC および空気処理装置

電極蒸気加湿器

A packaged atmospheric steam generator that uses water conductivity between immersed electrodes to supply hygienic steam to a duct lance or room blower.

Conductivity-Based Steam Generation
Replaceable Cylinder
Adaptive Fill and Drain
Duct or Room Dispersion

見積もりリクエスト製品案内

商品紹介

Mains water enters a replaceable steam cylinder containing large-area electrodes. Electrical current passes through the water and generates steam directly, while automatic fill and drain cycles regulate conductivity and output. The cabinet contains the cylinder, fill cup, drain pump and touchscreen controls, and connects to either a duct steam distributor or a direct-room blower pack.

主要な特徴

The water itself forms the resistive path, eliminating a separate immersed heater bundle.

A replaceable cylinder packages electrodes and accumulated mineral deposits into one service component.

Adaptive fill and blowdown respond to incoming water conductivity and operating current.

Touch controls provide proportional demand input, operating history and common building-control connections.

お客様の製品に関する懸念事項

Electrode humidifiers depend on water conductivity and mineral management to deliver stable steam with predictable maintenance.

Feed-water conductivity changes and causes unstable current draw.Automatic fill and drain logic adapts cylinder water concentration to the measured electrical load.

Minerals accumulate on electrodes and reduce usable output.The complete electrode cylinder is removable and replaceable without dismantling the cabinet.

Condensate in the steam hose causes spitting at the distributor.Correct hose slope and a dedicated condensate return keep liquid out of the dispersion lance.

Humidity demand varies quickly with outdoor-air load.Proportional input modulates steam output across the usable cylinder range.

典型的な用途

Pharmaceutical cleanroom humidificationData-center humidity controlHospital and laboratory air handlersElectronics manufacturing roomsMuseums and controlled storage

技術的なパラメータ

Representative physical and operating ranges for a commercial electrode humidifier are listed below.

コア材料	Replaceable polymer steam cylinder with corrosion-resistant grid electrodes
パネルの厚さ	1.0-1.5 mm powder-coated steel cabinet panel thickness
有効幅	350-1000 mm cabinet width depending on cylinder count
最大長さ	Up to 400 mm cabinet depth depending on cylinder count
鋼鉄の厚さを直面する	1.0-1.5 mm coated steel enclosure
コア密度	Approximately 900-910 kg/m³ for polypropylene steam-cylinder material
熱伝導率	Approximately 0.19-0.25 W/(m·K) for polymer cylinder material
表面仕上げ	Off-white powder-coated cabinet with blue polymer service components
ジョイントタイプ	Wall-mounted bolted cabinet with replaceable cylinder, hose steam outlet and threaded water connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single or dual steam cylinderDuct dispersion lance or direct-room blower packOutdoor weather-resistant enclosureHumidity sensors and common BMS protocols

Planning a Electrode Steam Humidifier specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する