English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
Duct اختبار تسرب
A portable positive/negative duct leakage tester with variable blower, calibrated flow measurement and automatic pressure control for HVAC commissioning.
- Controlled positive and negative duct pressurization.
- Calibrated leakage-flow measurement.
- Portable integrated field test system.
مقدمة المنتج
This self-contained tester connects to an isolated duct section, raises or lowers it to a defined pressure and measures the airflow required to hold that condition. A variable-speed blower, calibrated inlet and dual pressure channels allow the controller to calculate leakage rate during positive or negative tests. The wheeled enclosure and flexible test hose support field commissioning across large installations.
الخصائص الرئيسية
Closed-loop control maintains the selected test pressure.
Calibrated inlet measurement quantifies stabilizing leakage airflow.
Dual pressure channels monitor duct pressure and flow element.
Guided controller calculates leakage rate and test duration.
Wheeled field enclosure organizes hose, cables and adapters.
مخاوف المنتج للعملاء
Duct leakage must be quantified at a stable specified pressure even though the system response changes with seal quality, section size and test direction.
Test pressure drifts as leakage changes during the run.Closed-loop blower control continuously adjusts flow to maintain the selected pressure.
One-direction equipment cannot assess both supply and extract ductwork.A reversible flow arrangement supports positive and negative pressure tests.
Leakage calculations vary when technicians use separate instruments.Integrated pressure and calibrated-flow channels calculate leakage within one guided workflow.
Large test equipment is difficult to move through an active site.A compact wheeled enclosure and stored flexible hose simplify relocation between duct sections.
تطبيقات نموذجية
Cleanroom supply-duct leakage testingExhaust and return duct commissioningNew ductwork quality verificationPost-repair airtightness checksHVAC leakage-class documentation
المعلمات الفنية
Representative portable leakage-tester construction is shown below; blower capacity, calibrated flow range and hose size can be selected for the duct sections under test.
| المواد الأساسية | Variable-speed centrifugal blower, calibrated flow nozzle, pressure sensors and powder-coated steel enclosure |
|---|---|
| سمك اللوحة | Typically 1.0-2.0 mm for the steel cabinet panels |
| العرض الفعال | Approximately 450-650 mm across the mobile enclosure |
| الحد الأقصى الطول | Approximately 700-1000 mm including wheeled cabinet and stored hose |
| الصلب يواجه سمك | Typically 1.0-2.0 mm for powder-coated steel enclosure panels |
| الكثافة الأساسية | Approximately 7850 kg/m³ for structural steel components |
| الموصلية الحرارية | Approximately 45-55 W/(m·K) for structural steel components |
| إنهاء السطح | Safety-yellow powder-coated cabinet with graphite controls, black hose and stainless fittings |
| نوع المشترك | Cam-lock flexible duct connection with sealed calibrated inlet and barbed pressure taps |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Low- or high-flow configurationPositive/negative test modeMultiple calibrated flow nozzlesFlexible connection hose sizesReport download and printingغطاء نقل واقي
Planning a Duct Leakage Tester specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
