Duct leakage tester in three-quarter full view

Instrumen Ujian dan Pengesahan Bilik Bersih

Penguji Kebocoran Saluran

A portable positive/negative duct leakage tester with variable blower, calibrated flow measurement and automatic pressure control for HVAC commissioning.

Controlled positive and negative duct pressurization.
Calibrated leakage-flow measurement.
Portable integrated field test system.

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This self-contained tester connects to an isolated duct section, raises or lowers it to a defined pressure and measures the airflow required to hold that condition. A variable-speed blower, calibrated inlet and dual pressure channels allow the controller to calculate leakage rate during positive or negative tests. The wheeled enclosure and flexible test hose support field commissioning across large installations.

Ciri-ciri Utama

Reversible blower supports positive and negative duct tests.

Closed-loop control maintains the selected test pressure.

Calibrated inlet measurement quantifies stabilizing leakage airflow.

Dual pressure channels monitor duct pressure and flow element.

Guided controller calculates leakage rate and test duration.

Wheeled field enclosure organizes hose, cables and adapters.

Kebimbangan Produk Pelanggan

Duct leakage must be quantified at a stable specified pressure even though the system response changes with seal quality, section size and test direction.

Test pressure drifts as leakage changes during the run.Closed-loop blower control continuously adjusts flow to maintain the selected pressure.

One-direction equipment cannot assess both supply and extract ductwork.A reversible flow arrangement supports positive and negative pressure tests.

Leakage calculations vary when technicians use separate instruments.Integrated pressure and calibrated-flow channels calculate leakage within one guided workflow.

Large test equipment is difficult to move through an active site.A compact wheeled enclosure and stored flexible hose simplify relocation between duct sections.

Permohonan yang biasa

Cleanroom supply-duct leakage testingExhaust and return duct commissioningNew ductwork quality verificationPost-repair airtightness checksHVAC leakage-class documentation

Parameter teknikal

Representative portable leakage-tester construction is shown below; blower capacity, calibrated flow range and hose size can be selected for the duct sections under test.

Bahan Teras	Variable-speed centrifugal blower, calibrated flow nozzle, pressure sensors and powder-coated steel enclosure
Ketebalan Panel	Typically 1.0-2.0 mm for the steel cabinet panels
Lebar berkesan	Approximately 450-650 mm across the mobile enclosure
Panjang maksimum	Approximately 700-1000 mm including wheeled cabinet and stored hose
Keluli Menghadapi Ketebalan	Typically 1.0-2.0 mm for powder-coated steel enclosure panels
Ketumpatan teras	Approximately 7850 kg/m³ for structural steel components
Kekonduksian Terma	Approximately 45-55 W/(m·K) for structural steel components
Kemasan permukaan	Safety-yellow powder-coated cabinet with graphite controls, black hose and stainless fittings
Jenis Bersatu	Cam-lock flexible duct connection with sealed calibrated inlet and barbed pressure taps
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Low- or high-flow configurationPositive/negative test modeMultiple calibrated flow nozzlesFlexible connection hose sizesReport download and printingPerlindungan pengangkutan perlindungan

Planning a Duct Leakage Tester specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami