Duct leakage tester in three-quarter full view

クリーンルーム試験 · 検証機器

Duct 漏れテスト機

A portable positive/negative duct leakage tester with variable blower, calibrated flow measurement and automatic pressure control for HVAC commissioning.

Controlled positive and negative duct pressurization.
Calibrated leakage-flow measurement.
Portable integrated field test system.

見積もりリクエスト製品案内

商品紹介

This self-contained tester connects to an isolated duct section, raises or lowers it to a defined pressure and measures the airflow required to hold that condition. A variable-speed blower, calibrated inlet and dual pressure channels allow the controller to calculate leakage rate during positive or negative tests. The wheeled enclosure and flexible test hose support field commissioning across large installations.

主要な特徴

Reversible blower supports positive and negative duct tests.

Closed-loop control maintains the selected test pressure.

Calibrated inlet measurement quantifies stabilizing leakage airflow.

Dual pressure channels monitor duct pressure and flow element.

Guided controller calculates leakage rate and test duration.

Wheeled field enclosure organizes hose, cables and adapters.

お客様の製品に関する懸念事項

Duct leakage must be quantified at a stable specified pressure even though the system response changes with seal quality, section size and test direction.

Test pressure drifts as leakage changes during the run.Closed-loop blower control continuously adjusts flow to maintain the selected pressure.

One-direction equipment cannot assess both supply and extract ductwork.A reversible flow arrangement supports positive and negative pressure tests.

Leakage calculations vary when technicians use separate instruments.Integrated pressure and calibrated-flow channels calculate leakage within one guided workflow.

Large test equipment is difficult to move through an active site.A compact wheeled enclosure and stored flexible hose simplify relocation between duct sections.

典型的な用途

Cleanroom supply-duct leakage testingExhaust and return duct commissioningNew ductwork quality verificationPost-repair airtightness checksHVAC leakage-class documentation

技術的なパラメータ

Representative portable leakage-tester construction is shown below; blower capacity, calibrated flow range and hose size can be selected for the duct sections under test.

コア材料	Variable-speed centrifugal blower, calibrated flow nozzle, pressure sensors and powder-coated steel enclosure
パネルの厚さ	Typically 1.0-2.0 mm for the steel cabinet panels
有効幅	Approximately 450-650 mm across the mobile enclosure
最大長さ	Approximately 700-1000 mm including wheeled cabinet and stored hose
鋼鉄の厚さを直面する	Typically 1.0-2.0 mm for powder-coated steel enclosure panels
コア密度	Approximately 7850 kg/m³ for structural steel components
熱伝導率	Approximately 45-55 W/(m·K) for structural steel components
表面仕上げ	Safety-yellow powder-coated cabinet with graphite controls, black hose and stainless fittings
ジョイントタイプ	Cam-lock flexible duct connection with sealed calibrated inlet and barbed pressure taps
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Low- or high-flow configurationPositive/negative test modeMultiple calibrated flow nozzlesFlexible connection hose sizesReport download and printing保護輸送カバー

Planning a Duct Leakage Tester specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する