English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
دوش الهواء شخص واحد من الوجهين
A compact one-person air shower with active nozzle arrays on both sidewalls for balanced exposure across front, back and side garment surfaces.
- Opposed Nozzle Walls
- Balanced Air Coverage
- Compact Passage
- Closed-Loop Filtration
مقدمة المنتج
Two pressurised side plenums form the core of this double-sided air shower. Their opposed nozzle arrays provide cleaning air from both sides of the operator while screened lower returns collect the released particles. The layout is designed for facilities that require fuller all-around garment coverage than a one-wall air shower but retain a one-person entrance route.
الخصائص الرئيسية
Individually aimable outlets support adjustment for different garment lengths.
Two return paths collect air from both sides of the passage.
Removable inner access panels simplify cleaning of the nozzle and return surfaces.
Straight-through door alignment gives operators an intuitive direction of travel.
مخاوف المنتج للعملاء
Two active walls must improve body coverage while keeping airflow distribution and service access manageable.
One-sided airflow leaves protected surfaces on the far side of the operator.Matched arrays on the two sidewalls deliver air from opposing directions in the same cycle.
One side may feel stronger when the plenums are not balanced.Separate fan branches and balancing adjustments can equalise the two nozzle banks.
Crossing air streams may keep particles in the central passage.Paired low-level returns remove the contaminated air along both walls.
Internal maintenance disrupts the occupied passage.Serviceable nozzle panels provide access without dismantling the outer enclosure.
تطبيقات نموذجية
Semiconductor gowning routesOptics manufacturing cleanroomsSterile-packaging accessPrecision assembly laboratories
المعلمات الفنية
The following ranges suit a double-sided one-person cleaning chamber.
| المواد الأساسية | Mineral-wool insulated steel shell with two stainless nozzle banks, dual prefilters and H13 final filtration |
|---|---|
| سمك اللوحة | 50 mm insulated side and roof panels |
| العرض الفعال | 800-1000 mm clear operator passage width |
| الحد الأقصى الطول | Up to 1500 mm straight-through enclosure length |
| الصلب يواجه سمك | 1.0-1.2 mm powder-coated steel or stainless facing |
| الكثافة الأساسية | 80-100 kg/m³ mineral-wool panel infill |
| الموصلية الحرارية | 0.035-0.045 W/(m·K) for the mineral-wool insulation layer |
| إنهاء السطح | Low-sheen white powder coat with brushed stainless nozzle plates |
| نوع المشترك | Flush panel seams with sealed twin-plenum access panels and interlocked doors |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Twin 6-9 nozzle side arraysPowder-coated or stainless enclosureAirflow adjustment controllerCycle-status display
Planning a Double-Sided Single-Person Air Shower specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
