Three-quarter view of a double-sided single-person cleanroom air shower

人員 · 材料の汚染除去設備

Double—sided シングルパーソナルエアシャワー

A compact one-person air shower with active nozzle arrays on both sidewalls for balanced exposure across front, back and side garment surfaces.

Opposed Nozzle Walls
Balanced Air Coverage
Compact Passage
Closed-Loop Filtration

見積もりリクエスト製品案内

商品紹介

Two pressurised side plenums form the core of this double-sided air shower. Their opposed nozzle arrays provide cleaning air from both sides of the operator while screened lower returns collect the released particles. The layout is designed for facilities that require fuller all-around garment coverage than a one-wall air shower but retain a one-person entrance route.

主要な特徴

Opposed nozzle fields reduce shadow areas on the side of the body away from a single air source.

Individually aimable outlets support adjustment for different garment lengths.

Two return paths collect air from both sides of the passage.

Removable inner access panels simplify cleaning of the nozzle and return surfaces.

Straight-through door alignment gives operators an intuitive direction of travel.

お客様の製品に関する懸念事項

Two active walls must improve body coverage while keeping airflow distribution and service access manageable.

One-sided airflow leaves protected surfaces on the far side of the operator.Matched arrays on the two sidewalls deliver air from opposing directions in the same cycle.

One side may feel stronger when the plenums are not balanced.Separate fan branches and balancing adjustments can equalise the two nozzle banks.

Crossing air streams may keep particles in the central passage.Paired low-level returns remove the contaminated air along both walls.

Internal maintenance disrupts the occupied passage.Serviceable nozzle panels provide access without dismantling the outer enclosure.

典型的な用途

Semiconductor gowning routesOptics manufacturing cleanroomsSterile-packaging accessPrecision assembly laboratories

技術的なパラメータ

The following ranges suit a double-sided one-person cleaning chamber.

コア材料	Mineral-wool insulated steel shell with two stainless nozzle banks, dual prefilters and H13 final filtration
パネルの厚さ	50 mm insulated side and roof panels
有効幅	800-1000 mm clear operator passage width
最大長さ	Up to 1500 mm straight-through enclosure length
鋼鉄の厚さを直面する	1.0-1.2 mm powder-coated steel or stainless facing
コア密度	80-100 kg/m³ mineral-wool panel infill
熱伝導率	0.035-0.045 W/(m·K) for the mineral-wool insulation layer
表面仕上げ	Low-sheen white powder coat with brushed stainless nozzle plates
ジョイントタイプ	Flush panel seams with sealed twin-plenum access panels and interlocked doors
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Twin 6-9 nozzle side arraysPowder-coated or stainless enclosureAirflow adjustment controllerCycle-status display

Planning a Double-Sided Single-Person Air Shower specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する