Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Double-sided douche à air unique
A compact one-person air shower with active nozzle arrays on both sidewalls for balanced exposure across front, back and side garment surfaces.
- Opposed Nozzle Walls
- Balanced Air Coverage
- Compact Passage
- Closed-Loop Filtration
Introduction de produit
Two pressurised side plenums form the core of this double-sided air shower. Their opposed nozzle arrays provide cleaning air from both sides of the operator while screened lower returns collect the released particles. The layout is designed for facilities that require fuller all-around garment coverage than a one-wall air shower but retain a one-person entrance route.
Key Features
Individually aimable outlets support adjustment for different garment lengths.
Two return paths collect air from both sides of the passage.
Removable inner access panels simplify cleaning of the nozzle and return surfaces.
Straight-through door alignment gives operators an intuitive direction of travel.
Préoccupations du client produit
Two active walls must improve body coverage while keeping airflow distribution and service access manageable.
One-sided airflow leaves protected surfaces on the far side of the operator.Matched arrays on the two sidewalls deliver air from opposing directions in the same cycle.
One side may feel stronger when the plenums are not balanced.Separate fan branches and balancing adjustments can equalise the two nozzle banks.
Crossing air streams may keep particles in the central passage.Paired low-level returns remove the contaminated air along both walls.
Internal maintenance disrupts the occupied passage.Serviceable nozzle panels provide access without dismantling the outer enclosure.
Les applications typiques
Semiconductor gowning routesOptics manufacturing cleanroomsSterile-packaging accessPrecision assembly laboratories
Paramètres techniques
The following ranges suit a double-sided one-person cleaning chamber.
| Matériaux de base | Mineral-wool insulated steel shell with two stainless nozzle banks, dual prefilters and H13 final filtration |
|---|---|
| Panneau épaisseur | 50 mm insulated side and roof panels |
| Largeur effective | 800-1000 mm clear operator passage width |
| Longueur maximale | Up to 1500 mm straight-through enclosure length |
| Acier face épaisseur | 1.0-1.2 mm powder-coated steel or stainless facing |
| Densité Core | 80-100 kg/m³ mineral-wool panel infill |
| Conductivité thermique | 0.035-0.045 W/(m·K) for the mineral-wool insulation layer |
| surface finie | Low-sheen white powder coat with brushed stainless nozzle plates |
| Type joint | Flush panel seams with sealed twin-plenum access panels and interlocked doors |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Twin 6-9 nozzle side arraysPowder-coated or stainless enclosureAirflow adjustment controllerCycle-status display
Planning a Double-Sided Single-Person Air Shower specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
