İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
Çift taraflı tek kişilik hava duşu
A compact one-person air shower with active nozzle arrays on both sidewalls for balanced exposure across front, back and side garment surfaces.
- Opposed Nozzle Walls
- Balanced Air Coverage
- Compact Passage
- Closed-Loop Filtration
Ürün tanıtımı
Two pressurised side plenums form the core of this double-sided air shower. Their opposed nozzle arrays provide cleaning air from both sides of the operator while screened lower returns collect the released particles. The layout is designed for facilities that require fuller all-around garment coverage than a one-wall air shower but retain a one-person entrance route.
Ana Özellikler
Individually aimable outlets support adjustment for different garment lengths.
Two return paths collect air from both sides of the passage.
Removable inner access panels simplify cleaning of the nozzle and return surfaces.
Straight-through door alignment gives operators an intuitive direction of travel.
Müşteri Ürün Sorunları
Two active walls must improve body coverage while keeping airflow distribution and service access manageable.
One-sided airflow leaves protected surfaces on the far side of the operator.Matched arrays on the two sidewalls deliver air from opposing directions in the same cycle.
One side may feel stronger when the plenums are not balanced.Separate fan branches and balancing adjustments can equalise the two nozzle banks.
Crossing air streams may keep particles in the central passage.Paired low-level returns remove the contaminated air along both walls.
Internal maintenance disrupts the occupied passage.Serviceable nozzle panels provide access without dismantling the outer enclosure.
Tipik uygulamalar
Semiconductor gowning routesOptics manufacturing cleanroomsSterile-packaging accessPrecision assembly laboratories
Teknik parametreler
The following ranges suit a double-sided one-person cleaning chamber.
| Temel malzemeler | Mineral-wool insulated steel shell with two stainless nozzle banks, dual prefilters and H13 final filtration |
|---|---|
| Panel kalınlığı | 50 mm insulated side and roof panels |
| Effective Width (Etkili Genişlik) | 800-1000 mm clear operator passage width |
| Maksimum uzunluk | Up to 1500 mm straight-through enclosure length |
| Çelik yüz yüze kalınlığı | 1.0-1.2 mm powder-coated steel or stainless facing |
| Core Density (Çekirdek Yoğunluğu) | 80-100 kg/m³ mineral-wool panel infill |
| Termal İletkenlik | 0.035-0.045 W/(m·K) for the mineral-wool insulation layer |
| Yüzey bitirme | Low-sheen white powder coat with brushed stainless nozzle plates |
| Ortak tip | Flush panel seams with sealed twin-plenum access panels and interlocked doors |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Twin 6-9 nozzle side arraysPowder-coated or stainless enclosureAirflow adjustment controllerCycle-status display
Planning a Double-Sided Single-Person Air Shower specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
