Three-quarter view of a double-sided single-person cleanroom air shower

인력 및 재료 오염 제거 장비

싱글

A compact one-person air shower with active nozzle arrays on both sidewalls for balanced exposure across front, back and side garment surfaces.

Opposed Nozzle Walls
Balanced Air Coverage
Compact Passage
Closed-Loop Filtration

견적 요청 제품 찾아보기

상품 소개

Two pressurised side plenums form the core of this double-sided air shower. Their opposed nozzle arrays provide cleaning air from both sides of the operator while screened lower returns collect the released particles. The layout is designed for facilities that require fuller all-around garment coverage than a one-wall air shower but retain a one-person entrance route.

주요 기능

Opposed nozzle fields reduce shadow areas on the side of the body away from a single air source.

Individually aimable outlets support adjustment for different garment lengths.

Two return paths collect air from both sides of the passage.

Removable inner access panels simplify cleaning of the nozzle and return surfaces.

Straight-through door alignment gives operators an intuitive direction of travel.

고객 제품 관심사

Two active walls must improve body coverage while keeping airflow distribution and service access manageable.

One-sided airflow leaves protected surfaces on the far side of the operator.Matched arrays on the two sidewalls deliver air from opposing directions in the same cycle.

One side may feel stronger when the plenums are not balanced.Separate fan branches and balancing adjustments can equalise the two nozzle banks.

Crossing air streams may keep particles in the central passage.Paired low-level returns remove the contaminated air along both walls.

Internal maintenance disrupts the occupied passage.Serviceable nozzle panels provide access without dismantling the outer enclosure.

일반적인 응용 프로그램

Semiconductor gowning routesOptics manufacturing cleanroomsSterile-packaging accessPrecision assembly laboratories

기술 매개변수

The following ranges suit a double-sided one-person cleaning chamber.

핵심 재료	Mineral-wool insulated steel shell with two stainless nozzle banks, dual prefilters and H13 final filtration
패널 두께	50 mm insulated side and roof panels
유효 폭	800-1000 mm clear operator passage width
최대 길이	Up to 1500 mm straight-through enclosure length
강철 면면 두께	1.0-1.2 mm powder-coated steel or stainless facing
코어 밀도	80-100 kg/m³ mineral-wool panel infill
열전도도 (Thermal Conductivity)	0.035-0.045 W/(m·K) for the mineral-wool insulation layer
표면 마무리	Low-sheen white powder coat with brushed stainless nozzle plates
접합 유형	Flush panel seams with sealed twin-plenum access panels and interlocked doors
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Twin 6-9 nozzle side arraysPowder-coated or stainless enclosureAirflow adjustment controllerCycle-status display

Planning a Double-Sided Single-Person Air Shower specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.