English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
غرفة نظيفة وزن الجدول
A stainless weighing workstation with an independently supported granite platform that separates precision balances from operator contact.
- Independent granite balance slab
- Elastomer damping mounts
- Stainless cleanable surround
- Fine-adjust leveling feet
مقدمة المنتج
The cleanroom weighing table places the balance on a dense granite insert that is mechanically separated from the surrounding stainless work surface. Operator contact, writing and container handling occur on the outer bench rather than the balance support. Elastomer or pneumatic isolators damp transmitted floor energy, and adjustable feet level the supporting frame. Flush clearances around the stone remain wide enough for wipe access without bridging the isolated platform.
الخصائص الرئيسية
The isolated balance slab does not touch the surrounding operator work surface.
Fine-adjust feet level the base before the balance is calibrated.
A stainless surround contains powder spills while keeping the stone perimeter accessible for cleaning.
مخاوف المنتج للعملاء
Precision weighing can drift when footsteps, door movement or operator contact reaches the balance platform.
Writing or placing containers on the bench moves the balance reading.The balance rests on an independent stone slab isolated from the outer work surface.
A light metal tabletop resonates with nearby footfall and equipment vibration.Dense granite adds mass and damping directly beneath the instrument.
An uneven base forces the balance leveling feet near their adjustment limit.Frame-level adjusters establish a stable reference before instrument setup.
Narrow gaps around a stone insert retain spilled powder.A controlled open clearance exposes the platform perimeter without creating a rigid bridge.
تطبيقات نموذجية
Analytical balance weighingPharmaceutical dispensing supportReference standard preparationLaboratory sample weighingPrecision formulation
المعلمات الفنية
Typical configurable specifications for a cleanroom weighing table are listed below.
| المواد الأساسية | Dense granite balance platform with Type 304 stainless steel outer work surface and frame |
|---|---|
| سمك اللوحة | 50–80 mm granite insert; 1.2–1.5 mm stainless surround |
| العرض الفعال | 600–750 mm overall work surface depth |
| الحد الأقصى الطول | 1200 mm |
| الصلب يواجه سمك | 1.2–1.5 mm Type 304 stainless steel |
| الكثافة الأساسية | 2600–2800 kg/m³ granite platform |
| الموصلية الحرارية | 2.5–3.5 W/(m·K) for granite |
| إنهاء السطح | Polished granite insert with brushed stainless steel surround |
| نوع المشترك | Independently supported stone platform on elastomer or pneumatic damping mounts |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Elastomer or pneumatic isolationIntegrated balance draft shield shelfRear service chaseSUS316L outer surface
Planning a Cleanroom Weighing Table specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
