Cleanroom weighing table with isolated black granite balance platform

クリーンルーム家具 · ステンレス製品

クリーンルームの計量テーブル

A stainless weighing workstation with an independently supported granite platform that separates precision balances from operator contact.

Independent granite balance slab
Elastomer damping mounts
Stainless cleanable surround
Fine-adjust leveling feet

見積もりリクエスト製品案内

商品紹介

The cleanroom weighing table places the balance on a dense granite insert that is mechanically separated from the surrounding stainless work surface. Operator contact, writing and container handling occur on the outer bench rather than the balance support. Elastomer or pneumatic isolators damp transmitted floor energy, and adjustable feet level the supporting frame. Flush clearances around the stone remain wide enough for wipe access without bridging the isolated platform.

主要な特徴

A high-mass granite insert lowers sensitivity to short-duration floor and handling disturbances.

The isolated balance slab does not touch the surrounding operator work surface.

Fine-adjust feet level the base before the balance is calibrated.

A stainless surround contains powder spills while keeping the stone perimeter accessible for cleaning.

お客様の製品に関する懸念事項

Precision weighing can drift when footsteps, door movement or operator contact reaches the balance platform.

Writing or placing containers on the bench moves the balance reading.The balance rests on an independent stone slab isolated from the outer work surface.

A light metal tabletop resonates with nearby footfall and equipment vibration.Dense granite adds mass and damping directly beneath the instrument.

An uneven base forces the balance leveling feet near their adjustment limit.Frame-level adjusters establish a stable reference before instrument setup.

Narrow gaps around a stone insert retain spilled powder.A controlled open clearance exposes the platform perimeter without creating a rigid bridge.

典型的な用途

Analytical balance weighingPharmaceutical dispensing supportReference standard preparationLaboratory sample weighingPrecision formulation

技術的なパラメータ

Typical configurable specifications for a cleanroom weighing table are listed below.

コア材料	Dense granite balance platform with Type 304 stainless steel outer work surface and frame
パネルの厚さ	50–80 mm granite insert; 1.2–1.5 mm stainless surround
有効幅	600–750 mm overall work surface depth
最大長さ	1200 mm
鋼鉄の厚さを直面する	1.2–1.5 mm Type 304 stainless steel
コア密度	2600–2800 kg/m³ granite platform
熱伝導率	2.5–3.5 W/(m·K) for granite
表面仕上げ	Polished granite insert with brushed stainless steel surround
ジョイントタイプ	Independently supported stone platform on elastomer or pneumatic damping mounts
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Elastomer or pneumatic isolationIntegrated balance draft shield shelfRear service chaseSUS316L outer surface

Planning a Cleanroom Weighing Table specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する