Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Table de pesage Cleanroom
A stainless weighing workstation with an independently supported granite platform that separates precision balances from operator contact.
- Independent granite balance slab
- Elastomer damping mounts
- Stainless cleanable surround
- Fine-adjust leveling feet
Introduction de produit
The cleanroom weighing table places the balance on a dense granite insert that is mechanically separated from the surrounding stainless work surface. Operator contact, writing and container handling occur on the outer bench rather than the balance support. Elastomer or pneumatic isolators damp transmitted floor energy, and adjustable feet level the supporting frame. Flush clearances around the stone remain wide enough for wipe access without bridging the isolated platform.
Key Features
The isolated balance slab does not touch the surrounding operator work surface.
Fine-adjust feet level the base before the balance is calibrated.
A stainless surround contains powder spills while keeping the stone perimeter accessible for cleaning.
Préoccupations du client produit
Precision weighing can drift when footsteps, door movement or operator contact reaches the balance platform.
Writing or placing containers on the bench moves the balance reading.The balance rests on an independent stone slab isolated from the outer work surface.
A light metal tabletop resonates with nearby footfall and equipment vibration.Dense granite adds mass and damping directly beneath the instrument.
An uneven base forces the balance leveling feet near their adjustment limit.Frame-level adjusters establish a stable reference before instrument setup.
Narrow gaps around a stone insert retain spilled powder.A controlled open clearance exposes the platform perimeter without creating a rigid bridge.
Les applications typiques
Analytical balance weighingPharmaceutical dispensing supportReference standard preparationLaboratory sample weighingPrecision formulation
Paramètres techniques
Typical configurable specifications for a cleanroom weighing table are listed below.
| Matériaux de base | Dense granite balance platform with Type 304 stainless steel outer work surface and frame |
|---|---|
| Panneau épaisseur | 50–80 mm granite insert; 1.2–1.5 mm stainless surround |
| Largeur effective | 600–750 mm overall work surface depth |
| Longueur maximale | 1200 mm |
| Acier face épaisseur | 1.2–1.5 mm Type 304 stainless steel |
| Densité Core | 2600–2800 kg/m³ granite platform |
| Conductivité thermique | 2.5–3.5 W/(m·K) for granite |
| surface finie | Polished granite insert with brushed stainless steel surround |
| Type joint | Independently supported stone platform on elastomer or pneumatic damping mounts |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Elastomer or pneumatic isolationIntegrated balance draft shield shelfRear service chaseSUS316L outer surface
Planning a Cleanroom Weighing Table specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
