Cleanroom weighing table with isolated black granite balance platform

Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri

Temiz Oda Ağırlık Masası

A stainless weighing workstation with an independently supported granite platform that separates precision balances from operator contact.

Independent granite balance slab
Elastomer damping mounts
Stainless cleanable surround
Fine-adjust leveling feet

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The cleanroom weighing table places the balance on a dense granite insert that is mechanically separated from the surrounding stainless work surface. Operator contact, writing and container handling occur on the outer bench rather than the balance support. Elastomer or pneumatic isolators damp transmitted floor energy, and adjustable feet level the supporting frame. Flush clearances around the stone remain wide enough for wipe access without bridging the isolated platform.

Ana Özellikler

A high-mass granite insert lowers sensitivity to short-duration floor and handling disturbances.

The isolated balance slab does not touch the surrounding operator work surface.

Fine-adjust feet level the base before the balance is calibrated.

A stainless surround contains powder spills while keeping the stone perimeter accessible for cleaning.

Müşteri Ürün Sorunları

Precision weighing can drift when footsteps, door movement or operator contact reaches the balance platform.

Writing or placing containers on the bench moves the balance reading.The balance rests on an independent stone slab isolated from the outer work surface.

A light metal tabletop resonates with nearby footfall and equipment vibration.Dense granite adds mass and damping directly beneath the instrument.

An uneven base forces the balance leveling feet near their adjustment limit.Frame-level adjusters establish a stable reference before instrument setup.

Narrow gaps around a stone insert retain spilled powder.A controlled open clearance exposes the platform perimeter without creating a rigid bridge.

Tipik uygulamalar

Analytical balance weighingPharmaceutical dispensing supportReference standard preparationLaboratory sample weighingPrecision formulation

Teknik parametreler

Typical configurable specifications for a cleanroom weighing table are listed below.

Temel malzemeler	Dense granite balance platform with Type 304 stainless steel outer work surface and frame
Panel kalınlığı	50–80 mm granite insert; 1.2–1.5 mm stainless surround
Effective Width (Etkili Genişlik)	600–750 mm overall work surface depth
Maksimum uzunluk	1200 mm
Çelik yüz yüze kalınlığı	1.2–1.5 mm Type 304 stainless steel
Core Density (Çekirdek Yoğunluğu)	2600–2800 kg/m³ granite platform
Termal İletkenlik	2.5–3.5 W/(m·K) for granite
Yüzey bitirme	Polished granite insert with brushed stainless steel surround
Ortak tip	Independently supported stone platform on elastomer or pneumatic damping mounts
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Elastomer or pneumatic isolationIntegrated balance draft shield shelfRear service chaseSUS316L outer surface

Planning a Cleanroom Weighing Table specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun