Cleanroom weighing table with isolated black granite balance platform

클린룸 가구 및 스테인레스 스틸 제품

클린룸 무게 테이블

A stainless weighing workstation with an independently supported granite platform that separates precision balances from operator contact.

Independent granite balance slab
Elastomer damping mounts
Stainless cleanable surround
Fine-adjust leveling feet

견적 요청 제품 찾아보기

상품 소개

The cleanroom weighing table places the balance on a dense granite insert that is mechanically separated from the surrounding stainless work surface. Operator contact, writing and container handling occur on the outer bench rather than the balance support. Elastomer or pneumatic isolators damp transmitted floor energy, and adjustable feet level the supporting frame. Flush clearances around the stone remain wide enough for wipe access without bridging the isolated platform.

주요 기능

A high-mass granite insert lowers sensitivity to short-duration floor and handling disturbances.

The isolated balance slab does not touch the surrounding operator work surface.

Fine-adjust feet level the base before the balance is calibrated.

A stainless surround contains powder spills while keeping the stone perimeter accessible for cleaning.

고객 제품 관심사

Precision weighing can drift when footsteps, door movement or operator contact reaches the balance platform.

Writing or placing containers on the bench moves the balance reading.The balance rests on an independent stone slab isolated from the outer work surface.

A light metal tabletop resonates with nearby footfall and equipment vibration.Dense granite adds mass and damping directly beneath the instrument.

An uneven base forces the balance leveling feet near their adjustment limit.Frame-level adjusters establish a stable reference before instrument setup.

Narrow gaps around a stone insert retain spilled powder.A controlled open clearance exposes the platform perimeter without creating a rigid bridge.

일반적인 응용 프로그램

Analytical balance weighingPharmaceutical dispensing supportReference standard preparationLaboratory sample weighingPrecision formulation

기술 매개변수

Typical configurable specifications for a cleanroom weighing table are listed below.

핵심 재료	Dense granite balance platform with Type 304 stainless steel outer work surface and frame
패널 두께	50–80 mm granite insert; 1.2–1.5 mm stainless surround
유효 폭	600–750 mm overall work surface depth
최대 길이	1200 mm
강철 면면 두께	1.2–1.5 mm Type 304 stainless steel
코어 밀도	2600–2800 kg/m³ granite platform
열전도도 (Thermal Conductivity)	2.5–3.5 W/(m·K) for granite
표면 마무리	Polished granite insert with brushed stainless steel surround
접합 유형	Independently supported stone platform on elastomer or pneumatic damping mounts
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Elastomer or pneumatic isolationIntegrated balance draft shield shelfRear service chaseSUS316L outer surface

Planning a Cleanroom Weighing Table specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.