Cleanroom weighing table with isolated black granite balance platform

Perabot bilik bersih dan produk keluli tahan karat

Jadual Berat Bilik Bersih

A stainless weighing workstation with an independently supported granite platform that separates precision balances from operator contact.

Independent granite balance slab
Elastomer damping mounts
Stainless cleanable surround
Fine-adjust leveling feet

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The cleanroom weighing table places the balance on a dense granite insert that is mechanically separated from the surrounding stainless work surface. Operator contact, writing and container handling occur on the outer bench rather than the balance support. Elastomer or pneumatic isolators damp transmitted floor energy, and adjustable feet level the supporting frame. Flush clearances around the stone remain wide enough for wipe access without bridging the isolated platform.

Ciri-ciri Utama

A high-mass granite insert lowers sensitivity to short-duration floor and handling disturbances.

The isolated balance slab does not touch the surrounding operator work surface.

Fine-adjust feet level the base before the balance is calibrated.

A stainless surround contains powder spills while keeping the stone perimeter accessible for cleaning.

Kebimbangan Produk Pelanggan

Precision weighing can drift when footsteps, door movement or operator contact reaches the balance platform.

Writing or placing containers on the bench moves the balance reading.The balance rests on an independent stone slab isolated from the outer work surface.

A light metal tabletop resonates with nearby footfall and equipment vibration.Dense granite adds mass and damping directly beneath the instrument.

An uneven base forces the balance leveling feet near their adjustment limit.Frame-level adjusters establish a stable reference before instrument setup.

Narrow gaps around a stone insert retain spilled powder.A controlled open clearance exposes the platform perimeter without creating a rigid bridge.

Permohonan yang biasa

Analytical balance weighingPharmaceutical dispensing supportReference standard preparationLaboratory sample weighingPrecision formulation

Parameter teknikal

Typical configurable specifications for a cleanroom weighing table are listed below.

Bahan Teras	Dense granite balance platform with Type 304 stainless steel outer work surface and frame
Ketebalan Panel	50–80 mm granite insert; 1.2–1.5 mm stainless surround
Lebar berkesan	600–750 mm overall work surface depth
Panjang maksimum	1200 mm
Keluli Menghadapi Ketebalan	1.2–1.5 mm Type 304 stainless steel
Ketumpatan teras	2600–2800 kg/m³ granite platform
Kekonduksian Terma	2.5–3.5 W/(m·K) for granite
Kemasan permukaan	Polished granite insert with brushed stainless steel surround
Jenis Bersatu	Independently supported stone platform on elastomer or pneumatic damping mounts
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Elastomer or pneumatic isolationIntegrated balance draft shield shelfRear service chaseSUS316L outer surface

Planning a Cleanroom Weighing Table specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami