English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
حقيبة النفايات الغرف النظيفة
Low-particle LDPE cleanroom waste bag with a gusseted base, strong single-seam construction and optional color-coded or sterile presentation.
- Clean-converted LDPE liner for controlled waste collection
- Gusseted base fits rectangular cleanroom bins without bulky folds
- Tinted film supports visual waste-stream segregation
مقدمة المنتج
The Cleanroom Waste Bag is a flexible bin liner made from clean, high-clarity low-density polyethylene. A bottom gusset opens inside rectangular containers and distributes the load more evenly than a flat pouch. Smooth film, controlled conversion and clean double packaging reduce the risk of introducing loose fibers during transfer and routine waste removal.
الخصائص الرئيسية
Gusseted base expands to line square or rectangular receptacles
Smooth sealed edges avoid stitched seams and exposed fibers
Blue, clear and other controlled colors simplify waste-stream identification
Roll or flat-pack formats support different dispensing routines
مخاوف المنتج للعملاء
Waste liners in controlled areas must fit the receptacle, resist puncture and close without releasing collected debris. Poorly sized bags can collapse into the bin, while rough handling can drag contaminated outer surfaces through a cleaner zone.
An undersized liner can pull away from the bin rim during use.Match the flat width, gusset and length to the receptacle dimensions.
Sharp disposable items may puncture thin film.Select a heavier gauge or use a rigid sharps container where appropriate.
Overfilled bags are difficult to close without compressing waste.Set a fill limit that leaves enough clean film for secure closure.
Ambiguous liner colors can cause disposal-stream errors.Assign documented liner colors to each approved waste category.
تطبيقات نموذجية
For routine collection of used wipes, disposable garments, packaging film and other approved non-sharp waste in pharmaceutical, biotechnology, semiconductor, medical-device and precision manufacturing cleanrooms.
المعلمات الفنية
The ranges below cover common cleanroom LDPE bin-liner constructions. Final gauge, color, pack format and treatment should be selected for the receptacle, waste type and transfer route.
| المواد الأساسية | Virgin low-density polyethylene film |
|---|---|
| سمك اللوحة | 0.025-0.100 mm film gauge |
| العرض الفعال | 450-1000 mm flat bag width |
| الحد الأقصى الطول | 1200 mm bag length |
| الصلب يواجه سمك | 0 mm; all-polymer film construction |
| الكثافة الأساسية | 910-940 kg/m³ LDPE |
| الموصلية الحرارية | 0.31-0.36 W/(m·K), typical LDPE range |
| إنهاء السطح | Smooth clear or tinted low-particle film |
| نوع المشترك | Single sealed bottom with expanding gusset and open top |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Clear, blue and other controlled color tintsFlat pack or perforated roll formatStraight or gusseted baseLight, medium and heavy film gaugesSterile or non-sterile presentationCustom dimensions and double-bagged packing
Planning a Cleanroom Waste Bag specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
