English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Мешка для отходов в чистой комнате
Low-particle LDPE cleanroom waste bag with a gusseted base, strong single-seam construction and optional color-coded or sterile presentation.
- Clean-converted LDPE liner for controlled waste collection
- Gusseted base fits rectangular cleanroom bins without bulky folds
- Tinted film supports visual waste-stream segregation
Введение продукции
The Cleanroom Waste Bag is a flexible bin liner made from clean, high-clarity low-density polyethylene. A bottom gusset opens inside rectangular containers and distributes the load more evenly than a flat pouch. Smooth film, controlled conversion and clean double packaging reduce the risk of introducing loose fibers during transfer and routine waste removal.
Основные характеристики
Gusseted base expands to line square or rectangular receptacles
Smooth sealed edges avoid stitched seams and exposed fibers
Blue, clear and other controlled colors simplify waste-stream identification
Roll or flat-pack formats support different dispensing routines
Обеспокоенность клиентов продуктами
Waste liners in controlled areas must fit the receptacle, resist puncture and close without releasing collected debris. Poorly sized bags can collapse into the bin, while rough handling can drag contaminated outer surfaces through a cleaner zone.
An undersized liner can pull away from the bin rim during use.Match the flat width, gusset and length to the receptacle dimensions.
Sharp disposable items may puncture thin film.Select a heavier gauge or use a rigid sharps container where appropriate.
Overfilled bags are difficult to close without compressing waste.Set a fill limit that leaves enough clean film for secure closure.
Ambiguous liner colors can cause disposal-stream errors.Assign documented liner colors to each approved waste category.
Типичные приложения
For routine collection of used wipes, disposable garments, packaging film and other approved non-sharp waste in pharmaceutical, biotechnology, semiconductor, medical-device and precision manufacturing cleanrooms.
Технические параметры
The ranges below cover common cleanroom LDPE bin-liner constructions. Final gauge, color, pack format and treatment should be selected for the receptacle, waste type and transfer route.
| Основной материал | Virgin low-density polyethylene film |
|---|---|
| Толщина панели | 0.025-0.100 mm film gauge |
| эффективная ширина | 450-1000 mm flat bag width |
| Максимальная длина | 1200 мм длина мешки |
| Толщина линий стали | 0 mm; all-polymer film construction |
| Плотность ядра | 910-940 kg/m³ LDPE |
| Теплопроводимость | 0.31-0.36 W/(m·K), typical LDPE range |
| Поверхностная отделка | Smooth clear or tinted low-particle film |
| Объединенный тип | Single sealed bottom with expanding gusset and open top |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Clear, blue and other controlled color tintsFlat pack or perforated roll formatStraight or gusseted baseLight, medium and heavy film gaugesSterile or non-sterile presentationCustom dimensions and double-bagged packing
Planning a Cleanroom Waste Bag specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
